Motor cooling liquid level in reservoir - TR | FerrariChat

Motor cooling liquid level in reservoir - TR

Discussion in 'Boxers/TR/M' started by Lieven Engelbeen, Jul 2, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Lieven Engelbeen

    Jun 12, 2018
    127
    Belgium
    Full Name:
    Silverballgames
    Could anyone post a pic of the cooling liquid level with cold motor ?
    I am suspecting to lose some of the cooling liquid while driving.

    At first I had now and then a little bit of this blue/green cooling liquid on the floor, after driving. Now this almost disappeared ... but my level seems to go down ...
    Just need a pic to see what could be the normal level with cold motor.

    Tnx.
     
  2. spaceship

    spaceship Karting

    Feb 25, 2016
    50
    Full Name:
    S. Chan
    I think it's 10cm from the top.
     
  3. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,932
    southwest germany and thailand
    Full Name:
    romano schwabel
    it would be hard to see on a picture the level
    but when the level would be half of the complete height it is ok
     
  4. vincenzo

    vincenzo F1 Rookie

    Nov 2, 2003
    3,373
    If you overfill, it is designed to dump the excess the next time you run it to full temp. That is the perfect level. Next time it cools... have a look.
     
  5. Veedub00

    Veedub00 F1 Rookie
    Owner Silver Subscribed

    Jun 30, 2006
    4,900
    Troy, Michigan
    Full Name:
    James
    yeah, also it will dump excess if the air isn't properly bled too.
     
  6. Lieven Engelbeen

    Jun 12, 2018
    127
    Belgium
    Full Name:
    Silverballgames
    This I do not understand ... probably because I,am not really technical,skilled in this.
     
  7. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,145
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    The figure shown in your TR OM isn't clear enough? ;)

    6 cm down from the top surface of the filler neck (or about where the seam is between the two halves of the expansion tank):

    Image Unavailable, Please Login

    but this isn't a super-fussy thing (i.e., if it was 10 cm you'd never see any operational problem during rational street use.)
     
    Lieven Engelbeen likes this.
  8. Lieven Engelbeen

    Jun 12, 2018
    127
    Belgium
    Full Name:
    Silverballgames

Share This Page