My 308 up on Jack stands | FerrariChat
Buy

My 308 up on Jack stands

Discussion in '308/328' started by desire308, Feb 12, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. desire308

    desire308 Formula 3

    Oct 19, 2007
    1,433
    Florida
    Full Name:
    Peter W
    #1 desire308, Feb 12, 2008
    Last edited by a moderator: Sep 7, 2017
    The true nature of the car has been revealed! I stripped all of the wheel wells and found things are pretty dirty but mostly OK. Good news is the steering box and rack were re built and it looks pretty fresh...one less thing to worry about ;) I have some hoses that will need attention so things continue to progress. I still have yet to find any structural rust, or any of the panels...except of course the lower door skins. It's pretty limited. T. Rutlands sold me an honest car.

    If anyone can identify the valve with attached hoses in the last photo I'd appreciate it. The hose just above the oil cooler duct is shot.

    Also...where are the Digiplex boxes???
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. sparta49

    sparta49 F1 Veteran
    Owner

    Mar 3, 2001
    7,804
    LA
    Full Name:
    Frank
    #2 sparta49, Feb 12, 2008
    The digiplexes are located in the drivers side trunk. pull up the carpet and there is a panel there
     
  3. spiderseeker

    spiderseeker Formula 3

    Jul 22, 2005
    1,718
    Colorado
    Full Name:
    Steve
    #3 spiderseeker, Feb 13, 2008
    *** Be sure to check the fuel filler hose while you're in there, it's a major cause of fires !
    Make sure it's been changed recently or replace it and the vent lines etc.
    Looks like a great car !
     
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,959
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #4 Steve Magnusson, Feb 13, 2008
    That's the Diverter Valve for the air injection system -- see page 73 in your 216/81 OM.
     
  5. desire308

    desire308 Formula 3

    Oct 19, 2007
    1,433
    Florida
    Full Name:
    Peter W
    #5 desire308, Feb 13, 2008
    Thanks...The filler hose is one of the reasons I opened her up...it looks solid but from what I have heard change it anyway ;)
     
  6. desire308

    desire308 Formula 3

    Oct 19, 2007
    1,433
    Florida
    Full Name:
    Peter W
    #6 desire308, Feb 13, 2008
    Yep...it sure is in the OM...thanks!
     

Share This Page