Can someone give me the geo settings for a 348 GTB please. I've checked and I can't seem to find it on the forum. Could I use the standard settings or would I need different ones as I have 355 wheels, lowere suspension and 25mm spoacers on the rear?
You'll need non standard ones based on your new bits and pieces; you'll also want to decide if you want an aggressive (track biased) or street setup, whichever way you choose to go get a workshop with alot of experience with Ferrari's do it (should be around £100-£150)
I have a 1990 348 with 360 wheels. I had a 4 wheel alignment done in Nov 2005, here is what they said it took: Front Camber -.6 caster 5.6 toe 0.18 (Degrees) Rear Camber -1.6 toe 0.21 (Degrees) I dont know where they got thier info but they are a high end shop. Good luck
Did the 348 challange had different settings then the normal ts,tb,... ? Wich settings they use? Some good complete (chamber, toe in, caster, kingpin) allround setting for the hobby circuit driver? Standard should be front : chamber : -0°30' / -0°50' toe in : 2 / 3 mm caster : 5°30' +- 15' kingpin : 12° 27' 33" rear : chamber : -1°50' / -2°10' toe in : 2,5 / 3,5 mm caster : kingpin : ____________________ Samy
The 348 Challenge manuel had different settings. More aggressive for track. I think fronts -1.5 and rears -3.0 camber. I will check this evening in the '94 manuel and post for sure.
Official challenge manuel from '94. Camber value must not exceed the following maximum: Front - 1 40' Rear -3 15' No mention off toe in.
