Need advice on setting up my 348 wheel alignment with 360 starfish wheels | FerrariChat
Buy

Need advice on setting up my 348 wheel alignment with 360 starfish wheels

Discussion in '348/355' started by tommygunct, May 13, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tommygunct

    tommygunct Karting

    Dec 26, 2012
    175
    Stuart florida
    #1 tommygunct, May 13, 2018
    I'm look for some advice on setting up my 89 348 with 360 wheels and 215 x 18 frt and 273 x 18 rear tires I am looking for a good very aggressive street and track day setup toe. Camber I'm running stock springs and need advice on ride hight also I don't think the car was ever set up correctly and if there is anyone in the ct. Area for a recommendation to do it and set the corner weights thanks guys trying to get the most I can out of my car I drive it the way it was meant to be. Driven. I don't baby my car
     
  2. SoCal1

    SoCal1 F1 Veteran
    Owner Silver Subscribed

    Jun 14, 2011
    8,633
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    #2 SoCal1, May 13, 2018
    With 18s and stock springs it may be a little washy. I would go with challenge specs to start.
    Corner weights are depending on your driving style and something you may have to mess with
    Old fatso FBB may have some good info he messed around a lot #fatbillybob # fatbillybob
    I'd like to here others setup as well as I'll be getting to my 348 challenge end of summer to make it mo better

    :)
     
  3. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    9,739
    #3 Mitch Alsup, May 14, 2018
    Front ride height:: 165.6mm at front of A-arm 168.6 at rear of A-arm at center of pivot bolt.
    Rear ride height:: 200.4mm at front of A-arm 203.5 at rear of A-arm at center of pivot bolt.

    From 348 WSM.
     
    Pangea likes this.

Share This Page