Need details of bottom of nose | FerrariChat

Need details of bottom of nose

Discussion in '206/246' started by swift53, May 10, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    6,676
    E.S.
    Full Name:
    Alberto
    Could someone so kindly post photos of the end of the bottom of the nose for an early E series 03724.

    Basically, it is the trapezoidal folds behind the radiator where the bottom of the nose ends.

    Dimensions would be great also. Mine are there, but very chewed up. Tomorrow will post photos of what I have.

    Regards, Alberto
     
  2. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    6,676
    E.S.
    Full Name:
    Alberto
  3. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    3,811
    Norfolk - UK
    Full Name:
    Tony
    yikes..............good luck
     
  4. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    6,676
    E.S.
    Full Name:
    Alberto
    Well Tony, we have an 'English wheel' right?

    The bottom is way easier than the top...

    Regards, Alberto
     
  5. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,694
    Denmark
    Full Name:
    Peter H
  6. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    6,676
    E.S.
    Full Name:
    Alberto
    Indeed Peter, the E has a different opening at the bottom. In reality, it is very simple to make,
    but I require photos of the folds of the trapezoid as mine are practically gone...

    Thank you for the photos!

    Regards, Alberto
     
  7. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    6,676
    E.S.
    Full Name:
    Alberto
    PS, I just now realized that the 'trapezoid' , is closed by a strip about 1" wide at the far rear of nose
     
  8. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    3,811
    Norfolk - UK
    Full Name:
    Tony
    and a very good fabricator !

    remember I can make the coffee :)

    I don't have any details to help you but looking
     

Share This Page