Need fender well retaining clips | FerrariChat

Need fender well retaining clips

Discussion in '308/328' started by 89 FERRI, Sep 19, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 89 FERRI

    89 FERRI Guest

    Jul 31, 2010
    86
    Cold Spring Harbor ,
    Full Name:
    Elliot Siegel
    The clips holding my fender well liners are rusting and I need to purchase more , Any sources you can suggest ?? Thanks Elliot 516 528 5010 , [email protected]
     
  2. V.W. Porto

    V.W. Porto Karting

    Nov 10, 2003
    52
    San Diego
    Full Name:
    Vincent W. Porto
    Hi 89 Ferri,

    Not sure if these are what you are looking for but I replaced lots of my clips/fasteners using the following from McMaster-Carr (http://www.mcmaster.com)

    P/N 94810a200 (#10 wide panel for sheet metal screws)
    http://www.mcmaster.com/#94810a200/=8xorbq

    You can also use these sheet metal screws with the above fasteners (they're black too, just like the originals)

    P/N 90356A291 (#10 sheet metal tapping screws)
    http://www.mcmaster.com/#90356a291/=8xor4u

    A box of each is relatively cheap and you'll have lots left over to replace the others fastening the underside panels when you need them. Hope this helps.

    Ciao,

    Vincent
     

Share This Page