Need Headlight Adjuster | FerrariChat
Buy

Need Headlight Adjuster

Discussion in '360/430' started by sweetspotav, Mar 3, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sweetspotav

    sweetspotav Karting

    Nov 21, 2004
    122
    Florida
    Full Name:
    John Cawley
    #1 sweetspotav, Mar 3, 2016
    Last edited by a moderator: Sep 7, 2017
    Went to adjust the headlights and had an issue with one of the lights. Upon further investigation, I found that the adjust plastic was broken. I contacted Ricambi and the dealer and the part is not available individually and only available on a complete headlight assembly. Would anyone possibly have one I can purchase or know of a direction to start finding this piece? I really don't want to purchase a new headlight simply for a small piece of broken plastic!
    Image Unavailable, Please Login
     
  2. mello

    mello F1 Veteran
    Silver Subscribed

    Jul 12, 2013
    5,489
    CA Bay Area
    Full Name:
    Steve
    #2 mello, Mar 3, 2016
    Print one out with a 3D printer.
     
  3. voicey

    voicey Formula 3

    Jul 29, 2009
    1,193
    London, UK
    Full Name:
    Aldous Voice
    #3 voicey, Mar 3, 2016
    You can glue it back together - there's a guide on my website. What happened to the rest of the adjuster? Normally it's only the tangs that snap off....
     
  4. EZORED

    EZORED Formula 3
    Silver Subscribed

    Nov 24, 2007
    1,033
    Scottsdale, AZ
    Full Name:
    Dennis
    #4 EZORED, Mar 3, 2016
    I had the same problem on my 360 several years ago. If I remember, I removed the wheel and wheel house liner and accessed the back of the headlight. I removed the broken plastic and reused the bolt that is in your photo with a simple nut and washer arraignment. You can't adjust from the boot anymore, but after a little trial and error you can get the alignment correct. Sorry I did not take photos at the time.
     

Share This Page