Need help asap please, new clutch installed | FerrariChat
Buy

Need help asap please, new clutch installed

Discussion in '360/430' started by russomanno, Jun 18, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. russomanno

    russomanno Karting

    Dec 16, 2011
    173
    #1 russomanno, Jun 18, 2015
    Hey guys, just installed a clutch in my 360 F1. Using the navigator txt to change cluctch setting but it's all over the place. Did the self re-learn as well, but I put the car into gear and it automatically jumps into neutral. I don't know what the settings should be at in regards to the clutch configuration and the slipping start position script
     
  2. russomanno

    russomanno Karting

    Dec 16, 2011
    173
    #2 russomanno, Jun 18, 2015
    No matter what I change it to as soon as I let off the brake it goes into neutral
     
  3. rustybits

    rustybits F1 Rookie
    Professional Ferrari Technician

    Jan 28, 2007
    2,509
    Somewhere, anywhere
    Full Name:
    Eddie B
    #3 rustybits, Jun 18, 2015
    O.k let's start from scratch.
    1. What level of TCU do you have.
    2. What clutch thickness do you currently have
    3. What is the pis currently at
    4. Has a full clutch drain been performed

    For what it's worth, I didn't think you could alter clutch thickness with that machine. In fact last time I looked at one it was pretty restricted in some key areas. If that's still the case you are on a hiding to nothing, it'll never work right...
     
  4. russomanno

    russomanno Karting

    Dec 16, 2011
    173
    #4 russomanno, Jun 18, 2015
    Rusty can you call me?
     
  5. russomanno

    russomanno Karting

    Dec 16, 2011
    173
    #5 russomanno, Jun 18, 2015
    Factory TCU 2002 360 Modena
    Under clutch configuration it's at 13.27mm
    Slipping start position 4.44
     
  6. russomanno

    russomanno Karting

    Dec 16, 2011
    173
    #6 russomanno, Jun 18, 2015
    Clutch drain? Not sure
    It's showing 1% wear. Before I hooked up the computer it was running fine but I found it was slipping quite a bit
     
  7. russomanno

    russomanno Karting

    Dec 16, 2011
    173
    #7 russomanno, Jun 18, 2015
    I got everything to work but after driving the car it resets the values back to -2.23 mm which makes it think it's 220% worn
     

Share This Page