Need Help finding seat lever for 348 Spider | FerrariChat
Buy

Need Help finding seat lever for 348 Spider

Discussion in '348/355' started by Spider Jeff, Jul 14, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Spider Jeff

    Spider Jeff Rookie

    Oct 9, 2006
    43
    The Woodlands, Texas
    Full Name:
    Jeff H
    #1 Spider Jeff, Jul 14, 2009
    I managed to break the seat lever on the drivers side of my car. Neither Ricambi or Ferrari Houston has the part, any ideas? I also looked all over the internet, no luck so far.

    The top is about impossible to put up from its current position, without adjusting the seat back rake, with the handle broken. Not a big problem in Houston, where it has been about a hundred for a month, as the AC is weak at best on days like that.

    I suppose I could take to a shop that has CNC capabilities, and get one fabricated from metal, as a last resort?

    I appreciate any help/suggestions.

    Thanks

    Jeff
     
  2. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    #2 James-NZ, Jul 14, 2009
  3. I'm gone

    I'm gone Formula Junior

    Feb 5, 2006
    619
    Phoenix,az
    Full Name:
    Brian
    #3 I'm gone, Jul 14, 2009
    I need one of those also, #38 in the diagram looks like it.
     
  4. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    #4 James-NZ, Jul 14, 2009
  5. Spider Jeff

    Spider Jeff Rookie

    Oct 9, 2006
    43
    The Woodlands, Texas
    Full Name:
    Jeff H
    #5 Spider Jeff, Jul 14, 2009
    Thanks much, looks like part 38 (63998600), Mike at Ricambi called around for me also, I assume if it is the same as a 355, that lever is also not readily available.

    I appreciate you sending the link, very helpful!
     
  6. Dutchman

    Dutchman F1 Veteran
    Lifetime Rossa Owner

    Dec 4, 2002
    6,184
    EU
    Full Name:
    Ton
    #6 Dutchman, Jul 15, 2009
    Last edited: Jul 15, 2009
    Is this what you are looking for? Let me know if I can help.

    Right:

    http://cgi.ebay.de/Griff-f-Sitzverstellg-fuer-FERRARI-348-512-E-Nr-63294100_W0QQitemZ260303439099QQcmdZViewItemQQptZAutoteile_Zubehör?hash=item3c9b4b44fb&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1229%7C293%3A11%7C294%3A50

    Left:

    http://cgi.ebay.de/Griff-f-Sitzverstellg-fuer-FERRARI-348-512-E-Nr-63294200_W0QQitemZ260322564291QQcmdZViewItemQQptZAutoteile_Zubehör?hash=item3c9c6f18c3&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1229%7C293%3A9%7C294%3A50
     
  7. Spider Jeff

    Spider Jeff Rookie

    Oct 9, 2006
    43
    The Woodlands, Texas
    Full Name:
    Jeff H
    #7 Spider Jeff, Jul 15, 2009
    Thanks Ton, it may work, but would not match the passenger side.....mine has a checkered pattern, that one looks smooth. I guess I need to pay more attention when I look at a 355 to see how close they are, if they fit, maybe buy a LH and RH and be done with it....appreciate the help.
     

Share This Page