F8 Need help Identifying Bolt

Unscrew it and measure it. Looks like a torx 25 M5 -16 mm length washer head black oxide finish best guess. Once you can identify it more accurately I find this the go to place if the parts houses don't have it.These are probably hex drive but look close enough.

https://www.mcmaster.com/products/screws/thread-size~m5/metric-alloy-steel-flanged-button-head-screws/

https://www.mcmaster.com/products/button-heads/finish~black-oxide/

Or these with a separate black oxide washer should get you close enough. Identify the diameter the bolt threaded part in mm and measure underhead length and you've got a pretty good idea of replacement options/ Hope this helps

 

https://belmetric.com/m5-torx-button-flange-black-stainless-coarse-iso-7380-2/?sku=SBF5X16BLKSS

This also looks like it will help you replace the screws, once you identify it as an M5 or M6 and determine the length. Best I can tell on 488 diagrams is that is is a M5x16mm

 

part no. 925745