Need help to identify and locate | FerrariChat
Buy

Need help to identify and locate

Discussion in 'Technical Q&A' started by dontilgon, May 13, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dontilgon

    dontilgon Formula Junior

    May 30, 2011
    332
    NY/PA
    Full Name:
    Joseph
    #1 dontilgon, May 13, 2014
    Last edited by a moderator: Sep 7, 2017
    I'm unable to figure out which ferrari this seat lever came off of. I'm trying to find a r.h side to match the l.h side one in the photo. It is solid metal unlike the plastic over metal handle that seams to be out there. Any insite would be helpful thanks
    Image Unavailable, Please Login
     
  2. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,521
    Charleston, SC
    Full Name:
    Curt
    #2 vrsurgeon, May 13, 2014
    Looks like a 348 to me...
     
  3. Enzojr

    Enzojr F1 World Champ

    Dec 12, 2013
    14,001
    West of PDX
    Full Name:
    Tomy
    #3 Enzojr, May 13, 2014
    My 355 spider is close, but has a jog or slight curve in the middle.
    So not like the one pictured ...... But pretty close.
     
  4. Crowndog

    Crowndog F1 Veteran

    Jul 16, 2011
    7,042
    Fairfield,Pa
    Full Name:
    Robert
    #4 Crowndog, May 14, 2014
    A bit confused about your post. Is the picture what your looking for or what you have that isn't correct? The one pictured is Not for a 85 308 QV.


    When all else fails read the damn manual. - wife
     
  5. Shaide

    Shaide Formula Junior

    Jul 8, 2008
    613
    Las Colinas, DFW TX
    Full Name:
    Jason
    #5 Shaide, May 14, 2014
    Yep... the one in the picture looks identical to the one in my 348.
     
  6. dontilgon

    dontilgon Formula Junior

    May 30, 2011
    332
    NY/PA
    Full Name:
    Joseph
    #6 dontilgon, May 14, 2014
    Could you tell if it's all metal?
     
  7. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #7 Wade, May 14, 2014
    Last edited by a moderator: Sep 7, 2017
  8. Shaide

    Shaide Formula Junior

    Jul 8, 2008
    613
    Las Colinas, DFW TX
    Full Name:
    Jason
    #8 Shaide, May 14, 2014
    Yes... most definitely all metal. I recently sandblasted both of these down to the raw metal to repaint, due to the "sticky parts" issue.
     
  9. Shaide

    Shaide Formula Junior

    Jul 8, 2008
    613
    Las Colinas, DFW TX
    Full Name:
    Jason
    #9 Shaide, May 14, 2014
    Notice the spline/socket on these. If I recall correctly, there was a difference between the early 348s and the later 348s. The original picture is from an early car, the pic from Ricambi is the later version. This is my impression anyway, but of course I could be wrong. Perhaps Daniel or Mike at Ricambi have more accurate info and see this, they could weigh in?
     
  10. Shaide

    Shaide Formula Junior

    Jul 8, 2008
    613
    Las Colinas, DFW TX
    Full Name:
    Jason
    #10 Shaide, May 14, 2014
    For my car, being a 1990 year model, this part is like the pic in the original post. Also, the pic shows the right hand (DX) level and not the left. At least, that's how they are mounted in the 348. I can post some pictures here a little later if that would be helpful.
     
  11. dontilgon

    dontilgon Formula Junior

    May 30, 2011
    332
    NY/PA
    Full Name:
    Joseph
    #11 dontilgon, May 14, 2014
    Thanks jay. Any chance you'll give up your driver side lever :). My dilemma is , I bought the passenger one a year ago because my plastic over metal one bend and cracked. My replacement was all metal. So basically now I'm trying to replace the drivers side with a solid metal one but seems it to be obsolete. It's for a 512tr which stock are plastic over metal.
     
  12. Shaide

    Shaide Formula Junior

    Jul 8, 2008
    613
    Las Colinas, DFW TX
    Full Name:
    Jason
    #12 Shaide, May 14, 2014
    Last edited: May 14, 2014
    Ah, a 512TR... I follow you now. Yes, I believe the 348s and the later TRs shared a fair number of parts. Although I do have a number of spare parts for my car after going through a mini-restoration a few years back, sadly I don't have an extra seat lever. ><

    I'm not sure if this is current or not, but it looks like the folks at FerrParts are parting out a totaled TR. You might try and give them a call. I've had great luck with these guys in the past. Just a thought...

    Ferrari Parts, Huge Warehouse, Fast Shipping, New Used and OEM
     

Share This Page