need new piston rings | FerrariChat
Buy

need new piston rings

Discussion in '308/328' started by martin-uk, Nov 12, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #1 martin-uk, Nov 12, 2007
    hi i need full set of piston rings for (nikasil linners 30L mondial qv) superformance out of them, qv london out off them ?
     
  2. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,448
    Canada
    Full Name:
    Newman
    #2 Newman, Nov 12, 2007
    Nows the time to add hi-comp pistons!
     
  3. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #3 martin-uk, Nov 12, 2007
    no its not, iam selling the car when rebuilt,thanks anyway
     
  4. pad

    pad Formula 3

    Sep 30, 2004
    1,426
    Tequesta, FL
    Full Name:
    Paul Delatush
    #4 pad, Nov 12, 2007
    Contact:
    TOTAL SEAL, INC.

    22642 North 15th Avenue, Phoenix, AZ 85027, Toll-Free Order Line: (800) 874-2753,

    Technical Line: (623) 587-7400, Website: www.totalseal.com , Email: [email protected]

    They had rings for my 308 QV. The total price was under $250.00
     
  5. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #5 martin-uk, Nov 12, 2007
    HI, THANKS I HAVE JUST EMAILED THEM, HAVE YOU GOT THE NIKASIL LINNERS IN ? THANKS MATE
     
  6. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    #6 2NA, Nov 12, 2007
    New rings, is NOT rebuilt!
     
  7. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #7 martin-uk, Nov 12, 2007
    I KNOW THAT, THATS THE PARTS I CAN NOT GET, ALL THE OTHER PARTS ARE HERE, LINNERS, BEARINGS ,FULL GASKET SET, BELTS PULLEYS,WATER PUMP OIL PUMP,ETC
     
  8. pad

    pad Formula 3

    Sep 30, 2004
    1,426
    Tequesta, FL
    Full Name:
    Paul Delatush
    #8 pad, Nov 12, 2007
    Yes the liners are in and engine is running - I rebuilt the engine 2 winters ago and have about 400 miles on it - mostly on the track. The top 2 rings were conventional and needed to be fitted to the individual cylinders. The oil ring was a "gapless" 3 part ring. I don't recall if I needed to file those. Just a note, I also purchased a "grape" hone and gave the nykisil cylinders a quick hone - maybe 5 passes up and down the cylinder just to help the rings seat.
     
  9. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #9 martin-uk, Nov 12, 2007
    hi pad i have just sent a copy to ed,and hes having a look at the specs for the rings, would you know the part number he sent you for the rings thanks
     
  10. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #10 martin-uk, Nov 12, 2007
    hi pad this was the reply i have just got from ed,
    I was able to read it. It appears to have a 1.0 mm top and 2ns ring and a 3.0 oil ring. I will not have a set of rings for this application. I do not make the 1.0 mm 2nd ring and my oil ring will not be a good match for Nikasil

    On Nov 12, 2007, at 11:12 AM, martin west wrote:
     
  11. pad

    pad Formula 3

    Sep 30, 2004
    1,426
    Tequesta, FL
    Full Name:
    Paul Delatush
    #11 pad, Nov 12, 2007
    Just sent you a PM with specific information. Hope this helps.
     
  12. martin-uk

    martin-uk Karting

    Feb 24, 2007
    183
    uk
    Full Name:
    martin
    #12 martin-uk, Nov 12, 2007
    managed to order them from t,rutlands,
     

Share This Page