Need some help from a California T owner | FerrariChat
Buy

Need some help from a California T owner

Discussion in 'California(Portofino)/Roma(Amalfi)' started by stevecomp, Dec 9, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stevecomp

    stevecomp Formula Junior

    Mar 1, 2013
    743
    South Australia
    Full Name:
    Steve
    #1 stevecomp, Dec 9, 2020
    Hi guys,

    I’m looking for the wiring order of the bonnet lock switch, it has three wires going to the micro switch, the wires are different colour to the wiring loom.

    Can someone take the cover off the front slam panel and take a picture of the wires going into the plug from the loom. A new latch with micro switch is being replaced however removing the electrical connection the wiring loom pins came out of the plug! Don’t ask I didn’t do it but some help would be appreciated.

    thanks in advance.



    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. stevecomp

    stevecomp Formula Junior

    Mar 1, 2013
    743
    South Australia
    Full Name:
    Steve
    #2 stevecomp, Dec 11, 2020
    All sorted thanks for all the help lol
     
  3. drcollie

    drcollie Karting

    Dec 15, 2013
    115
    #3 drcollie, Dec 11, 2020
    That is SO Italian.

    i was restoring a 1991 Moto Guzzi Daytona 1000 and the electrical was giving me fits. Nothing was working and sparks everywhere. After two days of this nonsense, i finally figured out they ran out of red wire at the factory for 12v hot and used black on the rest of the bike because that's what they had laying around. I kid you not, half the hot leads were the same color as ground. They only made 193 of these so they were not going to job up for wiring looms!


    Image Unavailable, Please Login
     
    JrBucksco likes this.

Share This Page