Need some Help with Clutch and Pressure Plate | FerrariChat
Buy

Need some Help with Clutch and Pressure Plate

Discussion in '206/246' started by dman550, Apr 23, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dman550

    dman550 Karting

    Dec 17, 2012
    111
    White Rock BC
    Full Name:
    Dario
    #1 dman550, Apr 23, 2013
    Last edited: Apr 23, 2013
    Today I delivered my new clutch and pressure plate to my mechanic and once we opened the package I received from one of the suppliers we noticed it was a newer style type that would bolt on the flywheel. My set up I guess is original and it had 3 large pins that stick out and go through a big boss on the pressure plate. The throw out bearing is different, it is much smaller than the original and simpler. The clutch disc looks fine and the same.

    Is there a source for the original style pressure plate? Or do I pull the pins in the original flywheel and use the new modern stuff?

    Any help will be appreciated

    Dario
     
  2. bertspeed

    bertspeed Formula Junior

    Sep 19, 2009
    308
    #2 bertspeed, Apr 24, 2013
    I am doing the clutch on my engine and the new cover and disc can only be fitted with removing the pins on the flywheel.I have not been able to source an original cover after much searching,although thats not to say you may have better luck.
     

Share This Page