Need tool and jack kit | FerrariChat
Buy

Need tool and jack kit

Discussion in '308/328' started by rokodude, Jan 14, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rokodude

    rokodude Karting

    Dec 3, 2007
    70
    Overton Nevada
    Full Name:
    Michael J Greco
    #1 rokodude, Jan 14, 2008
    I need a tool and jack kit for an 86 Mondial.Any ideas of where to look?I know they will be expensive,but I need them.


    Thanks,new owner
     
  2. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    #2 BigTex, Jan 14, 2008
    Welcome!

    Try TRutlands as they salvage cars, watch eBay, and FerrariUK had the tool rolls brand new last year, don't know if that is still the case.

    Of course the Factory is offering a Tool Kit in Schedoni that would fit any model.....BIG BUCKS$$$$$$ LOL!
     
  3. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,671
    South East
    Full Name:
    Jimmie
    #3 greyboxer, Jan 14, 2008
    This is a pretty regular question so you could try www.eurospares.co.uk or maybe a search here would help for other ideas
     
  4. canuck

    canuck Rookie

    May 11, 2007
    26
    #4 canuck, Jan 16, 2008
    Ebay has the Ferrari tool kits from time to time. If you are looking just for owners use... I took mine out of the car after reading Fchat blogs on theft. Harbor Freight had a 4-way tire wrench for $4.00 and got a scissor jack out of a car at the wreckers. The tool kit was replaced with a Sears Craftsman multiset in a nice zippered case. I am storing my leather set in my garage and have the car set up for all situations. Saw the sets go for as much as $800. US. Good luck in your hunt.
    scott
     
  5. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    #5 BigTex, Jan 17, 2008
    Griot's Garage has a nice Ferrari set by FACOM.......but if you want OEM you'll have to find it from a wreck or Ferrari of UK...
     
  6. 8valve

    8valve Formula 3

    Sep 3, 2003
    1,029
    Netherlands
    Full Name:
    Mick A.
    #6 8valve, Jan 17, 2008
    Where are you located?
     
  7. Jeff328

    Jeff328 Formula 3

    Sep 5, 2006
    2,293
    WI
    #7 Jeff328, Jan 17, 2008
    Ricambi sells OEM tool kits. Or at least they used to. I bought one for my 328 from them last year.

    My local Ferrari dealer also could obtain an OEM tool kit, but they were a little more expensive than Ricambi.

    As far as the jack kit goes, I've seen them on ebay for ridiculous amounts.
     
  8. 8valve

    8valve Formula 3

    Sep 3, 2003
    1,029
    Netherlands
    Full Name:
    Mick A.
    #8 8valve, Jan 17, 2008
  9. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    #9 BigTex, Jan 17, 2008
    Thanks Mick!

    Not an early 308 though, our thumbwheel rode the extension shaft, not the jack itself, maybe a 308QV, based on the belt kit?

    That does have the rare trouble light, though!
     
  10. 8valve

    8valve Formula 3

    Sep 3, 2003
    1,029
    Netherlands
    Full Name:
    Mick A.
    #10 8valve, Jan 17, 2008

    Rokodude needs the set for his '86 Mondial.....I think this would be correct for his car.
    Just ordered two thumbwheels from Verell by the way! :)
     
  11. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    #11 BigTex, Jan 17, 2008
    I luckily still have all THREE thumbwheels! LOL!

    Thankfully, rarely use them!
     
  12. 8valve

    8valve Formula 3

    Sep 3, 2003
    1,029
    Netherlands
    Full Name:
    Mick A.
    #12 8valve, Jan 17, 2008
    I have one, in two parts:(
     
  13. rokodude

    rokodude Karting

    Dec 3, 2007
    70
    Overton Nevada
    Full Name:
    Michael J Greco
    #13 rokodude, Jan 18, 2008
    I found a complete tool at Eurospares for about $375.00. Ordered it today.
     
  14. 8valve

    8valve Formula 3

    Sep 3, 2003
    1,029
    Netherlands
    Full Name:
    Mick A.
    #14 8valve, Jan 18, 2008
     
  15. 8valve

    8valve Formula 3

    Sep 3, 2003
    1,029
    Netherlands
    Full Name:
    Mick A.
    #15 8valve, Jan 18, 2008

    Just for my information, has Eurospares confirmed availability of the ORIGINAL Tool and jackkit for this price? I doubt it....
    And if you get a chance, please fill in your profile:)
     

Share This Page