Need | FerrariChat

Need

Discussion in '365 GT4 2+2/400/412' started by bundas, May 6, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bundas

    bundas F1 Veteran Owner

    Joined:
    Dec 31, 2005
    Messages:
    7,090
    Location:
    lexington ky usa
    Full Name:
    mitchell barnes
    Cam bolt. Inside vacuum hsg.
     
    bundas, May 6, 2015
    #1
  2. bjwhite

    bjwhite F1 Rookie Silver Subscribed

    Joined:
    Mar 17, 2006
    Messages:
    4,806
    Location:
    Seattle, WA
    Full Name:
    Brian White
    Best title ever. Haha.
     
    bjwhite, May 6, 2015
    #2
  3. bundas

    bundas F1 Veteran Owner

    Joined:
    Dec 31, 2005
    Messages:
    7,090
    Location:
    lexington ky usa
    Full Name:
    mitchell barnes
    For my spare motor. This may be tough to find. I need a part number. Guys. I will accept a sample. So I can make one
     
    bundas, May 6, 2015
    #3
  4. Bill26

    Bill26 Formula Junior

    Joined:
    Jun 19, 2005
    Messages:
    258
    Location:
    Australia
    Full Name:
    Bill Murdoch
    Mitchell,

    Bolt head - 32mm across flats, 6.5mm high
    Drive slot is 6.6mm wide, 19mm long and 13.5mm deep

    From Eurospares website;

    Bolt - 100206 $23.47
    Washer -100205 $0.82
    Washer - 106612 $35.37
    Vacuum pump drive - 115728 $126.00

    This bolt and 2 washers drive the vacuum pump and are different from the other 3 cam drive bolts and washers.

    (They are on the vacuum pump parts drawing, not the cam drive parts drawing)

    Regards

    WM
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    Bill26, May 6, 2015
    #4
  5. bundas

    bundas F1 Veteran Owner

    Joined:
    Dec 31, 2005
    Messages:
    7,090
    Location:
    lexington ky usa
    Full Name:
    mitchell barnes
    Ordered. I hope this is the last issue
     
    bundas, May 7, 2015
    #5

Share This Page