NEEDED 348 New Clutch Master Cylinder | FerrariChat

NEEDED 348 New Clutch Master Cylinder

Discussion in '348/355' started by ferrari360driver, Jun 5, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ferrari360driver

    Apr 8, 2012
    203
    Florida
    Full Name:
    Rich
    Any source for a aftermarket new one or a rebuilt kit?
     
  2. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
  3. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    2,743
    Malaysia - KL
    Full Name:
    Miroljub Stojanovic
    #3 m.stojanovic, Jun 5, 2019
    Last edited: Jun 5, 2019
    ernie likes this.
  4. ferrari360driver

    Apr 8, 2012
    203
    Florida
    Full Name:
    Rich

    Just an update.. bought the one you suggested from mrfiat and it is not a direct fit. The holes in the cylinder that slide onto the studs in the 348 are too small. Had to drill them out to the appropriate size. Otherwise it does appear to be the same. Waiting on my power bleeder to see if it actually works since manually bleeding is not working.
     
  5. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    2,743
    Malaysia - KL
    Full Name:
    Miroljub Stojanovic
    Sorry, I forgot to mention the mounting holes - instead of 8 mm dia. smooth holes, the holes on the Alfa cylinders are threaded to M8 so quite easy to drill through (especially when you are paid $50 per hole).
     
  6. jjtjr

    jjtjr Formula Junior

    Aug 29, 2016
    668
    Vermont
    Full Name:
    john truskowski
    Did you bench bleed the new cylinder?
     
  7. ferrari360driver

    Apr 8, 2012
    203
    Florida
    Full Name:
    Rich
    No did not bench bleed it
     

Share This Page