New 308 QV owner needs ignition help! | FerrariChat

New 308 QV owner needs ignition help!

Discussion in 'Technical Q&A' started by Crockettsonny84, Oct 6, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Crockettsonny84

    Sep 3, 2013
    24
    Westerville, Ohio
    Full Name:
    Michael A Wilson
    While doing some engine cleaning, the HT lead to cyl 1 came out of the distributor. For some reason the inner core of the sleeve tore off, causing me to cut down the length of the wire. So because of this, I changed the wire out with cyl 2 wire. (confusing? yes) In the midst of all of it, I forgot to mark what wires went where and I have no clue now where each "point" goes. i.e. what wire corresponds to the screws in the distributor cap? I have checked diagrams, searched the web, with no avail. All I know is that the center is the coil and that cyl 4 wire was not taken out. Any help whatsoever would be appreciated!
     
  2. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,811
    Cerritos, CA.
    Full Name:
    Mike
    #2 miketuason, Oct 6, 2013
    Last edited by a moderator: Sep 7, 2017
  3. Crockettsonny84

    Sep 3, 2013
    24
    Westerville, Ohio
    Full Name:
    Michael A Wilson
    Unfortunately, mine isn't numbered. This is exactly what I needed. Many thanks!
     

Share This Page