For Sale New all-in-one F430 style key/fob for the F355, 360, 456, 550 and 575!

How exactly this works, you need the electronics from F430 key and the remote of 550?
Or you need empty F430 key and you provide the electronics ?

 

I understand , you need one of the three fobs and an empty F430 key ( without electronics ). Is this mean the remote can be put in Enzo key as well ?

 

Good Afternoon @gobble, I have a 98 550 and only 1 key and fob (black). Was hoping to get at least one spare either with new style key or the original red 550 fob. Not sure what options you got and what you need from me. I would appreciate if you can dm me. Thanks

 

Hi, I’d like to chat about potentially getting a spare 430-syle key. Currently have red fob and two black (one doesn’t appear to work) and only one key so would like a spare. Can you send me a DM? Thanks

 

I programmed one of these keys to my 360 last night.

once I got it right it was easy, but I did mess up the first time, which was not a big deal at all.

here’s my listing of precise steps which perhaps can supplement the video instructions:


1) key in ignition, key off, press button on fob to disarm.
2) wait for slow flashing red light. 2+ mins
3) turn key once from OFF-ON-OFF for first number of your pin (assume PIN is 1234)
4) wait five seconds
5) turn key 2 times from OFF-ON-OFF
6) wait five seconds
7) turn key 3 times from OFF-ON-OFF
8) wait five seconds
9) turn key 4 times from OFF-ON-OFF
10) Wait five seconds
11) switch to ON. Light should turn solid red.
12) when light goes off, cycle ignition ON-OFF-ON again.
13) wait for light to go off and cycle ignition again. Repeat this approx. 10 times. NOTE: You need to click off/on each time before the light goes back on, if you wait too long, the light will turn back on and potentially screw up the process
14) light will start a slow flashing red when it enters learning mode
15) once in learning mode, push the button on the loaner fob, my black fob, and the new key. You will see the red light do a fast flash when it senses each fob

That will program the keys to the loaner fob

Thereafter, repeat the entire of above steps (with the loaner’s PIN of 5555) but using my original red fob, my black fob, and the new key.
Basically you need the intermediate step because you can only load three fobs at a time.

obviously I’m not an expert on this, but this is my listing of steps which I shared with Ferrari fobs while troubleshooting and they seem to work.

 

Mark- Sound familiar?

 

Hi there, I have a 2000 360 Modena with full set of fobs and keys. I would like option 1 with the unprogrammed fob returned for $350? Let me know if this is still possible, thanks - I can also send key for cutting

 

Are these still around and available with the red ferrari key?? Thanks!

 

Interested as well