New Source for rebuilding hydrailic cylinders & hoses

Hi Mario,

Can you tell me what the typcial rebuilds run?

While running thgouth the top bleeding procedure on my 1997 spider, I ran into some top issues and it looks like I might need two new cylinders:

The right side primary cylinder won't retract fully while I run through the emergency switch cycles although the piston can be fully compressed manually.

The right side secondary is fully retracted, and can be manually extended (it then pops right back to rectracted) and doesn't move by itself at all in the emergency process.

Any other FChatters who have encountered similar issues, please weigh in what what worked or other sources of rebuilds.

Thanks,

Jim