Non airbag steering wheel | Page 2 | FerrariChat

Non airbag steering wheel

Discussion in '456/550/575' started by mominayal, Dec 2, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
  2. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,423
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Looks great. How did you paint it?
     
  3. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    F456M likes this.
  4. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm

    Attached Files:

    Ferrari55whoa likes this.
  5. Auraraptor

    Auraraptor F1 World Champ
    Lifetime Rossa Owner

    Sep 25, 2002
    13,396
    MO
  6. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    I've heard Nardi and Momo...but you're right it's got comparable DNA!!
     
  7. mominayal

    mominayal Karting

    Feb 2, 2017
    119
    Indiana
    Looks amazing.
     
  8. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    I am addicted to Momo steering wheels now....found this one from mid-1990s....I had to 3d print a center horn ring to fit correct horn button.....but I think it's larger diameter (360mm) flows better with the 456GT interior.......
    View attachment 2500478
     
  9. Auraraptor

    Auraraptor F1 World Champ
    Lifetime Rossa Owner

    Sep 25, 2002
    13,396
    MO
    I think you attached the wrong image.
     
  10. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    F456M and Ferrari55whoa like this.
  11. Auraraptor

    Auraraptor F1 World Champ
    Lifetime Rossa Owner

    Sep 25, 2002
    13,396
    MO
    Great work! Looks factory. I agree, it better fits the interior design. mom pretty sure the OEM 575 steering wheel diameter is 360mm or 365mm by my eye, so your in good company!
     
  12. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    Ferrari55whoa, INTMD8 and Auraraptor like this.
  13. Auraraptor

    Auraraptor F1 World Champ
    Lifetime Rossa Owner

    Sep 25, 2002
    13,396
    MO
    Looks even better !

    Please share information about which steering wheel and the model file. That way others can benefit from your work.
     
  14. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    The wheel is the Daytona 3 by Momo.....was manufactured mid 1990's...I'll try and attach the STL file for the center horn ring..
     
    Auraraptor likes this.
  15. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,423
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Looks great, good job.
     
  16. scowman

    scowman F1 Rookie

    Mar 25, 2014
    2,527
    Scottsdale AZ
    Full Name:
    Stu Boogie
    Ferrari55whoa likes this.
  17. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    I actually 3d printed a center adapter to fit the Momo opening and hold the Ferrari horn button. I could not get the file to upload to FChat but anyone who wants it I can email to them.
     
    Ferrari55whoa likes this.
  18. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    hey man. so I just got a '95 456GT and I too want to go with the non-airbag steering wheel. I'll have to go back and reread the post to make sure I'm understanding correctly; but i'm probably going to want one and replicate your MOMO steering wheel with 3D printed center section! that is unless I can find a non-airbag OEM 456 steering wheel - and then do the 3 ohm resister trick. anyway great work!!
     
  19. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    @Jareldsalinsky is that the green one from BaT? Or the blue one before it? Either way beautiful 456s! I wanted the non-airbag Ferrari rudder but the lowest price I could find want well north of $2k ...this wheel is very close in design and it's the same diameter (360mm if I recall correctly). I used the ohm resistor to keep the airbag light off.....it worked perfectly! Send me an email of you need any help with the conversion!
     
  20. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    Hey man. Actually the one I got was not on BaT. Found it on a random site in NY. Email: [email protected]
    The car is actually still getting predelivery inspection. Should receive it in 2-3 weeks. Cheers!
     
  21. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    Hey follow up here. After playing with my car now for several months I’ve come to learn (from this extensive Fchat site) that my car has been on here before, when owned by Dean Halter, who did the passenger air bag delete dash reupholstery. Anyway I love my car, and there’s plenty to do!
    Now back to steering wheels- if I bought the same Momo wheel would you consider 3D printing that section again for another Fchatter?
    The Oem non-airbag euro st wheels are cost-prohibitively expensive, and I really like your outcome! Thanks
     
  22. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    I can probably put you in contact with the shop that actually did yhe printing of my design and they can print and shop to you.

    I think you will need to buy the exact same MOMO wheel so send me an email when you get it!!
     
  23. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    Gotcha! Thanks for the reply. For some reason, I thought you actually 3-D printed it yourself! Yes, actually, can you please send the exact model of Momo? And then, if you send me who 3-D printed it, I can take it from there! Thanks again!
     
  24. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    hey man just following up. Not sure I ever got an email from you, or I lost it in the abyss of junk email!
    when you get a sec could you please send me the exact model of your MOMO wheel, and the contact for the company that 3D printed your steering wheel center section.
    thanks!
     
  25. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
    My wheel is the Daytona 3, it is from the mid-1990's. I don't have a part number, I bought it from a private owner who had never installed it....found it on ebay!

    The 3d printer was here in Jacksonville..and there website is https://www.forgejax.com/

    if they cannot find the file let me know and I can find it in my email and I cab send to you, my name is Lance Malcolm it should be able to be located with my name..
     

Share This Page