Non airbag steering wheel | Page 3 | FerrariChat

Non airbag steering wheel

Discussion in '456/550/575' started by mominayal, Dec 2, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    398
    Full Name:
    Lance Malcolm
  2. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    Awesome! Ty! Gonna get working on this!
    I may re-connect with you if I have any issues with install.
    thanks again
     
  3. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    All, I have good news! I have confirmed that the euro non-airbag steering wheel fits well on the American 456 with minimal issues. 4 screws hold the usual airbag steering wheel in place; and 4 screws hold the euro non-airbag steering wheel in place, but at a different radius. I had an adapter made and it works perfectly. I can give the parameters of the adapter out if desired. I'm sure it can be 3D printed but I had mine made out of Aluminum - auto jewelry!
    Pics to follow!
     
    Qavion likes this.
  4. Jaredsalinsky

    Jaredsalinsky Formula Junior
    Rossa Subscribed

    Feb 8, 2023
    503
    tampa FL
    Full Name:
    Jared salinsky
    I did the resistor trick on the airbag plug. The other wire is the ground for the horn. The positive for the horn is on the native hub so I will make a little jumper wire adapter so the horns work. I will confirm it works when I get to it this weekend.
     
    Aerosurfer likes this.

Share This Page