o2 sensor help in my 360 1999 | FerrariChat

o2 sensor help in my 360 1999

Discussion in 'Technical Q&A' started by gam4, May 11, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gam4

    gam4 Formula Junior
    Silver Subscribed

    Nov 22, 2003
    589
    I can't get my o2 sensor in my computer to get tested by the OBD so I can get a Ma.inspection sticker. It reads not ready. The dealer said just drive the car and it will reset but I have driven 500 miles and nothing! I have no check engine lights on. Has anyone else ever had this happen? any ideas how to get it to pass the State inspection. Thank you in advance.
     
  2. No Doubt

    No Doubt Seven Time F1 World Champ

    May 21, 2005
    72,740
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    Is your car running when the inspection station attempts to read the system?
     
  3. gam4

    gam4 Formula Junior
    Silver Subscribed

    Nov 22, 2003
    589
    yes. Why do you ask?
     
  4. No Doubt

    No Doubt Seven Time F1 World Champ

    May 21, 2005
    72,740
    Vegas+Alabama
    Full Name:
    Mr. Sideways
    I haven't heard about it for 360's, but some of the 355's have reported difficulties getting OBD2 codes to scan (ala at an emissions test) with the motor off.
     
  5. ferrarilou

    ferrarilou Formula Junior

    Apr 13, 2004
    513
    US
    Full Name:
    Lou Menditto
    Gam,

    You mentioned that your car is a 1999 model. There is a Ferrari Service Campaign for the OBDII connector under the dash that affects the early model years of the 360 (I don't know how far it goes). It was a rather simple procedure for the dealer to do. I'm pretty sure it was free. You might want to call the dealer and have him check on his computer if there is any history of this fix being done to your car.


    Lou
     

Share This Page