360 OBD2 Not working?

Immobiliser disarmed?

 

Does the LED near your left knee stop flashing when you push the fob button? Key on immediately after pushing the button or, if the 360 allows it, push the fob button with the ignition key already on.

This is assuming you haven't had an immobiliser delete modification done to your car.

Surely you went through this procedure with your 355?

 

On my F355, I seem to recall that I had to turn on my scanner after I had disabled the immobiliser. I have an Innova scanner, too.

Has your car had the OBD2 port wiring update? It seems to affect some scanners on some cars. i.e. there should be a spliced black wire at the back of the OBD2 port. It's spliced with a red(or brown?) "Scotchlok"

 

Any fuses blown? I seem to recall it’s on the same circuit as either the cigarette lighter or the lights in the door/glovebox.

 

Also the dome light.

Image Unavailable, Please Login

 

Replace fuse and pray that you don't have a short somewhere

It's a blue, 15 amp fuse

 

Any Automotive store.... NAPA, O'Reilly

Very generic. ATC/ATO size.

https://www.napaonline.com/en/p/BK_7822184?impressionRank=1

 

I have used my toolkit too. I also found it hilarious when doing so.

I was also like well don’t you know it does serve a purpose other than being a paperweight.


Sent from my iPhone using FerrariChat

 

Looks like I gave you wrong directions on fuse type. I assumed they were standard size, but they look smaller.

Are the blades on the fuses rectangular or pointed?

https://en.wikipedia.org/wiki/Fuse_(automotive)#/media/File:Electrical_fuses,_blade_type.svg

(EDIT: Or are they low profile with rectangular blades?)