OEM Bolt dimensions..

Discussion in '360/430' started by DDAVE, Jun 17, 2020.

  1. DDAVE

    DDAVE Rookie
    Silver Subscribed

    Jun 2, 2020
    Full Name:
    David Vincec
    Hi All,

    I've recently acquired a F360 that needs a bit of tidying up.. I'm sending the original wheels off for refurbishment.. but managed to pick up a set of the modular option wheels at a good price recently so will run them until my originals get back (then try to decide which to keep!)… but.. that's just the context..

    About half the original wheel bolts are showing corrosion/chrome lifting on the face.. which just won't do with newly refurbished wheels. I'm intending to send the original bolts off to be stripped and rechromed - but the specialist who does it wants them for 3-4 weeks. I don't really want the car off the road for 3-4 weeks (partly why I picked up the modular wheels to tide me over!); but also don't want to invest in another set of Ferrari wheel studs given their relatively high cost.

    so.. the question is... what size are the oem studs, and more importantly, what degree shoulder do they have? I don't mind buying a set of cheap aftermarket studs to keep me on the road until the originals get back... I'm just struggling to identify exactly which to buy!

    many thanks for thoughts!

  2. To remove this ad click here.


    MCASEY Rookie

    Apr 1, 2015
    Sydney Australia
    Image Unavailable, Please Login This may for the Ti bolts, but the dimensions for the thread and length, angel etc are good.
    DDAVE likes this.
  4. Auraraptor

    Auraraptor F1 World Champ
    Lifetime Rossa Owner

    Sep 25, 2002
    Stock 360 wheels have the following specs:

    27mm head
    52mm from the tip of the bolt to the start of the conical head
    20mm thread length

Share This Page