Official Lidatek/Technik1 group buy | FerrariChat

Official Lidatek/Technik1 group buy

Discussion in 'New York Tri-State' started by technik1, Sep 27, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. technik1

    technik1 Formula Junior

    Joined:
    Nov 26, 2003
    Messages:
    282
    Location:
    NYC
    Full Name:
    Gus Technik
    Ok fellas,

    With a show of hands, who's in? I'd like to get 20 installs if possible. The prices are $660.00 + tax, installed ($280. group rate + $380. labor).

    F-chatters only : if we stealthly install your V1 unit with mirror etched display, we'll incorporate the Lidatek LED within the upper V1 arrow--a technik 1 signature.

    -Michael
    -Noah x2
    -Pchop x2 (Wrangler, Minivan?)
    -Kieth x4
    -Emil
    -Hubi gets an extra 10% off as a fellow watch nut
    -Udalmia--yes, we'll flatbed to/from Fort Lee
    -David, your brother gets the same courtesy
    -Vik x3--you need three units--rumor has it you cruise at triple-digit speeds

    GT
     
  2. ClydeM

    ClydeM F1 World Champ Owner Rossa Subscribed

    Joined:
    Nov 4, 2003
    Messages:
    11,903
    Location:
    Wayne, NJ
    Full Name:
    Clyde E. McMurdy
    I'm interested, but chatting with Lidatek tech support for use in the 308.
    I should have an answer in a day or two
     
  3. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    hey gus....

    i already bought a Lidatek with 1 sensor a couple months back (from that BMW group buy) but never installed it. But i just want to be extra safe and go with a dual sensor setup in both front grilles. How much would it be for me if i purchase another sensor from u and have u install the entire lidatek thing w/o doing the mirror etched display? and how much for the lidatek install with the mirror etched display?

    and how much would it be if u installed my lidatek and v1 unit with mirror etched display? (i already have a v1 unit myself)

    Remember i get the extra 10% as u said :)
    just reply here or send me a PM.
    thanks Gus! u da man zen!
     
  4. Black355

    Black355 F1 Veteran

    Joined:
    Feb 3, 2004
    Messages:
    5,255
    Location:
    10036
    Full Name:
    Emil
  5. ClydeM

    ClydeM F1 World Champ Owner Rossa Subscribed

    Joined:
    Nov 4, 2003
    Messages:
    11,903
    Location:
    Wayne, NJ
    Full Name:
    Clyde E. McMurdy
  6. Black355

    Black355 F1 Veteran

    Joined:
    Feb 3, 2004
    Messages:
    5,255
    Location:
    10036
    Full Name:
    Emil
    Seen it. 1 problem: The stuff from colorware is not that great...
     
  7. technik1

    technik1 Formula Junior

    Joined:
    Nov 26, 2003
    Messages:
    282
    Location:
    NYC
    Full Name:
    Gus Technik
  8. pchop

    pchop F1 Rookie Rossa Subscribed

    Joined:
    Jun 12, 2002
    Messages:
    2,667
    Location:
    Usually NY often elsewhere.
    Full Name:
    John
    Did I read that right?!!
     
  9. Ed P.

    Ed P. Formula 3

    Joined:
    Dec 28, 2002
    Messages:
    2,177
    Location:
    Long Island
    Full Name:
    No Longer
    HE needs one for his Big Wheel too....
     
  10. 993 guy

    993 guy F1 Rookie

    Joined:
    May 21, 2004
    Messages:
    3,066
    Location:
    Bergen County NJ
    Full Name:
    Eric D
    Oooo, that was cold...but damn funny! :)
     
  11. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    just stopped by Technik1 today in my whip.....and YES...it was raining outside (for those rain pusssies!!)

    My car is going scheduled to go into Technik1 monday morning to do the following:

    1. Lidatek install with standard 1 front grill sensor (decided didnt need the 2nd sensor)
    2. Valentine 1 install
    3. Both lidatek and v1 will be installed into the 360M rearview mirror :)
    4. Titanium colored metallic tint on my side windows

    All this should take 3 days or so.
    Gus is da man!
     
  12. DodgeViper01

    DodgeViper01 F1 Veteran

    Joined:
    Oct 1, 2003
    Messages:
    6,867
    4 more than the amount of cars you have.
     
  13. 993 guy

    993 guy F1 Rookie

    Joined:
    May 21, 2004
    Messages:
    3,066
    Location:
    Bergen County NJ
    Full Name:
    Eric D
    Are you sure about this addition? Isn't it going to look a little too "fast and furious"? Just my opinion of course...
     
  14. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    its not actually metallic titanium.....its greyish tint with a hint of metallic.
    hard to describe. guess u will just have to see it when it's done :)
     
  15. 993 guy

    993 guy F1 Rookie

    Joined:
    May 21, 2004
    Messages:
    3,066
    Location:
    Bergen County NJ
    Full Name:
    Eric D
    I'm sure it'll look good. That V1 setup is the BOMB. I already have the whole K40 getup in my rides, so I'll just have to wait until my new whip arrives to get the V1 integrated setup.
     
  16. noahlh

    noahlh Formula 3

    Joined:
    Aug 28, 2003
    Messages:
    2,231
    Location:
    NYC, NY
    Full Name:
    Noah
    Gus -- count me in for x1 (the TL only). Unfortunatley because of the immense liabiliaty it would create (i.e. encourgaing customers to break the law/speed), I can't touch the 360 or Gallardo with this stuff.

    nlh
     
  17. Merdav

    Merdav Formula Junior

    Joined:
    Apr 11, 2004
    Messages:
    980
    I'm in for one for the 355 also.
     
  18. ghost

    ghost F1 World Champ Lifetime Rossa

    Joined:
    Dec 10, 2003
    Messages:
    10,046
    Location:
    Singapore
    Isn't that the only way to cruise?! - :D

    Let me see how Hubi's turns out Gus, 'cause I'm potentially thinking about an integrated package Lidatek / V1 package. Either way, hold off for now - I'll let you know.
     
  19. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    Got a very satisfying PM yesterday after I got back from Technik1 from someone. I dont want to divulge any details, but I will have to postpone my V1/Lidatek install. But I will be tinting still on monday.

    Gus, dont worry....it'll be a matter of time before i have u do the v1/lidatek. :) just have to clear up a few things first about my car.
     
  20. technik1

    technik1 Formula Junior

    Joined:
    Nov 26, 2003
    Messages:
    282
    Location:
    NYC
    Full Name:
    Gus Technik
    I know it sounds mirrorish, but actually it is a smoke film with a metal layer, giving it a subtle reflection. It almost looks like a darker double-pane glass.
    This is a 3M Scotch Tint exclusive. Varying shades are widely used in WRC Rally racing for extreme snow, sand, etc.--it reflects far more glare and rejects heat than a comparable smoke film.

    This 3M metalized window film compliments metallic colors from silver all the way to metallic black. Way cool...

    GT
     
  21. 993 guy

    993 guy F1 Rookie

    Joined:
    May 21, 2004
    Messages:
    3,066
    Location:
    Bergen County NJ
    Full Name:
    Eric D
    I have 3M film on my cars and it is the best. I know you guys won't "cheese" up a 360M or any other car for that matter...it just sounded a little iffy from the description at first. I'm sure it'll look great...
     
  22. noahlh

    noahlh Formula 3

    Joined:
    Aug 28, 2003
    Messages:
    2,231
    Location:
    NYC, NY
    Full Name:
    Noah
    What's with all the secret agent stuff today? You, Keith....come on boys..MAN UP and speak in public!
     
  23. kenster888

    kenster888 Formula Junior

    Joined:
    Nov 3, 2003
    Messages:
    436
    Location:
    Massachusetts
    Is tinting the front windows illegal in the tri-state?

    Also is there a CLEAR film that'll repell UV/heat?
     
  24. 993 guy

    993 guy F1 Rookie

    Joined:
    May 21, 2004
    Messages:
    3,066
    Location:
    Bergen County NJ
    Full Name:
    Eric D
    Yes it is...as for your second question, I'll let Gus answer that. ;-)
     
  25. ClydeM

    ClydeM F1 World Champ Owner Rossa Subscribed

    Joined:
    Nov 4, 2003
    Messages:
    11,903
    Location:
    Wayne, NJ
    Full Name:
    Clyde E. McMurdy
    1) front windows.....no
    2) Yes. For cars, apartment windows & office buildings
     

Share This Page