Offset for 328 ABS Wheel?

Im selling my beloved HRE wheels and a fellow F-chatter want to know if they will fit on a ABS 328. Does anyone have the offset for that wheel?

Thanks,

Rob Garven

 

No way Jose -- unless you can invent the "negative" thickness spacer . See post #7:

http://ferrarichat.com/forum/showthread.php?t=8361

 

Hi Steve!!

Im confused I used the link here

http://www.yokohamatire.com/utcustom.asp

to measure the offsets on my HRE wheels and a stock 14" campagnolo and I got

HRE 53 mm or 2 1/32

stock 45mm

what am I doing wrong??

 

Oh no! Those 288/GTO knock-off's?

Dang! I covet those wheels....

 

here is my stock wheel

218mm wide

118mm backspace

218 ÷ 2 = 109mm

118 - 109 = 9mm

 

I think your second post has about the right calculation for the stock 308B/S/4 chassis design (stock using a ~+11? mm offset wheel -- but it is all starting to fade, and maybe I'm confusing B/S with 4 ).

It's always possible that your HRE set were not done in an exact way originally so maybe they are not so far off. With your HRE measurements and the 328 ABS offset numbers you should be able get a feeling for what's what -- i.e., what you really want to work out is where would the inboard and outboard sidewalls of the HRE set be located (compared to the stock 328 ABS wheels) when mounted on the 328 ABS chassis.

What are the width x diameter for your HRE set? Single size?

 

Steve,

The rims are 7.5x16, they are 8 5/16 wide with a backspace of 6 3/16". Unlike you and most others Im not that good at math!! I measured the last post in mm and I swear its +/- 1mm. I think I measure better in mm!!

Here are the wheels, very sad too see them go

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4647234215

a mondial owner asked about them too, all I know is my wife will allow me to have so many sets of wheels in the house!!!!

 

Beautiful wheels... if those were 17's I'd be wanting to buy them.