Oil sump cover removal 308 | FerrariChat
Buy

Oil sump cover removal 308

Discussion in 'Technical Q&A' started by hqa, Nov 3, 2003.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hqa

    hqa Rookie

    Nov 2, 2003
    5
    #1 hqa, Nov 3, 2003
    I would like to change the engine oil sump cover gasket because it is leaking on my 81 308gtb US. The gasket needs to replaced (cracked) The pan drops down about a 1/2" and stops. Is there something else that needs to be removed to free the assembly? It looks from the drawings that it should clear the gear lever control shaft.... or is that tin oil defector attacted and hitting it? Can this be done without top side removal? I shure hope so.
    thx
    HQA
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,832
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Nov 3, 2003
    This comes up so often it should be in the FAQ ;).

    You need to remove the lower dipstick tube that protrudes down into sump and maybe the oil temp thermistor IIRC. (If you don't have the SPC go to the on-line FerrariUK SPC for a picture).
     
  3. hqa

    hqa Rookie

    Nov 2, 2003
    5
    #3 hqa, Nov 3, 2003
    Thanks 91TR!!
    Both items did have to come out....then everything droped right out.
     

Share This Page