430 - OIL TEMP SENDING UNIT 2007 | FerrariChat
Buy

430 OIL TEMP SENDING UNIT 2007

Discussion in '360/430' started by Steelton Keith, Aug 25, 2025 at 11:24 AM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Steelton Keith

    Steelton Keith F1 Veteran
    Owner Rossa Subscribed

    Aug 19, 2009
    7,828
    Raleigh NC
    Full Name:
    Keith Hall
    #1 Steelton Keith, Aug 25, 2025 at 11:24 AM
    Went through the manual and can't find diagram of where this is. Also searched this thread. Oil temp gauge not registering. I had fluids changed a month ago and thinking something jarred sending unit? But first, where is it and is this something I can fix or troubleshoot? Thanks
     
  2. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Sep 26, 2015
    3,198
    Sarasota Fl/Pittsburgh
    #2 LorenzoR, Aug 25, 2025 at 12:07 PM
    pretty sure its under the intake towards the rear of the car. You can see it just by looking down in
     
  3. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #3 flash32, Aug 25, 2025 at 12:16 PM
    right next to motor oil screen access
     
    Steelton Keith likes this.
  4. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Sep 26, 2015
    3,198
    Sarasota Fl/Pittsburgh
    #4 LorenzoR, Aug 25, 2025 at 12:23 PM
    Steelton Keith likes this.
  5. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #5 flash32, Aug 25, 2025 at 12:31 PM
    That's the pressure sensor
     
  6. Steelton Keith

    Steelton Keith F1 Veteran
    Owner Rossa Subscribed

    Aug 19, 2009
    7,828
    Raleigh NC
    Full Name:
    Keith Hall
    #6 Steelton Keith, Aug 25, 2025 at 12:38 PM
    still can't find it after looking at several miniscule diagrams
     
  7. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #7 flash32, Aug 25, 2025 at 2:34 PM
  8. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Sep 26, 2015
    3,198
    Sarasota Fl/Pittsburgh
    #8 LorenzoR, Aug 25, 2025 at 2:37 PM
    Dom i am seeing brake calipers
     
  9. Steelton Keith

    Steelton Keith F1 Veteran
    Owner Rossa Subscribed

    Aug 19, 2009
    7,828
    Raleigh NC
    Full Name:
    Keith Hall
    #9 Steelton Keith, Aug 25, 2025 at 2:48 PM
    I guess I should ask if I do locate the sensor is it the kind of thing a guy with no skills and no tools can check/inspect/replace or is it a mechanic's job? Thanks everyone. Keith
     
  10. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Sep 26, 2015
    3,198
    Sarasota Fl/Pittsburgh
    #10 LorenzoR, Aug 25, 2025 at 3:01 PM
  11. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #11 flash32, Aug 25, 2025 at 3:15 PM
    I apologize I did post the same picture as Lorenzo but for some reason I don't know where it got that calipers from
     
  12. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #12 flash32, Aug 25, 2025 at 3:16 PM
  13. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #13 flash32, Aug 25, 2025 at 3:18 PM
    Yes
    Yes
     
  14. Steelton Keith

    Steelton Keith F1 Veteran
    Owner Rossa Subscribed

    Aug 19, 2009
    7,828
    Raleigh NC
    Full Name:
    Keith Hall
    #14 Steelton Keith, Aug 25, 2025 at 7:03 PM
    OK. so service manager says sensor is inside lower oil pan!
     
  15. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,999
    Central NJ
    Full Name:
    Dominick
    #15 flash32, Aug 25, 2025 at 7:25 PM
    Keith it is very easy to get to ...locate the motor oil screen go to the side of the sump and up 1 in
     
    Steelton Keith likes this.

Share This Page