Opinion regarding hose clamps | FerrariChat
Buy

Opinion regarding hose clamps

Discussion in 'Technical Q&A' started by 50hdmc, Dec 9, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 50hdmc

    50hdmc Formula 3

    Oct 10, 2006
    1,211
    Michigan
    Full Name:
    mark s
    #1 50hdmc, Dec 9, 2008
    ......well, I am replacing all my hoses during my 30k engine out. I am going to silicone and I was wondering whether you guys thought that stainless steel T-clamps are a better way to go. I know they cost more but considering the potential damage caused by leaking/loss of oil etc it seems like good insurance ...is this overkill????

    thanks, as always..........
    mark in MIchigan
     
  2. bill brooks

    bill brooks F1 Veteran
    Silver Subscribed

    Jul 30, 2007
    6,085
    waynesburg,pa
    Full Name:
    bill brooks
    #2 bill brooks, Dec 11, 2008
    i should think that aba or norma clamps would be sufficient.
    norma is oem on many ferraris and are made entirely of stainless as long as you specify "w4" composition.
    norma's torro line carries that spec. they are the worm-screw type with smooth band around the hose circumference.
    aba also carries similar products. aba is usa based.
    west marine, mcmaster-carr, pelican, newco products are just a few of the places these clamps can be purchased.
    if you intend to go all-silicone, you need to investigate which clamp is suitable for that application.
     
  3. Jeff Pintler

    Jeff Pintler Formula Junior

    Jul 20, 2005
    537
    Richland
    Full Name:
    Jeff Pintler
    #3 Jeff Pintler, Dec 12, 2008
    If you inspect the clamps carefully you should get great service from the original clamps. Most people are concerned with originality and you can replace them as needed. One note on the silicone hoses: all the clamps had to be re-tightened after a heat cycle when I switched to silicone. YMMV

    Jeff Pintler
    89 348tb, 86tr
     

Share This Page