Ordered the 1/12 Tamiya Enzo... | FerrariChat
Buy

Ordered the 1/12 Tamiya Enzo...

Discussion in 'Collectables, Literature, & Models' started by Mike360, Jan 17, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mike360

    Mike360 F1 Rookie

    Feb 18, 2004
    3,432
    Sydney, Australia
    Full Name:
    Mike
    #1 Mike360, Jan 17, 2005
    Okay.
    Does anyone have any tips on how this mother should be built?
    I know to be careful of the hinges for the engine cover, but are there any other tips that i should be made aware of???

    Cheers
    -Mike
     
  2. noelsairplanes

    noelsairplanes Karting
    BANNED

    Oct 19, 2004
    113
    Ann Arbor, Michigan
    #2 noelsairplanes, Jan 17, 2005
    Hi Mike,

    Assembly is really not too difficult. Their are only two concerns, one you already know about, the engine cover hinges which do break very easily if you're not real careful snapping the cover into them. The only other thing is a lot of tiny screws that hold the front of the model together and can get lost very easily especially if you drop them on the floor! I know, it happened to me but, I got lucky and found it.

    Finshed model is beautifully detailed and I'll be surprised if your not very impressed.

    Good Luck,
     
  3. Mike360

    Mike360 F1 Rookie

    Feb 18, 2004
    3,432
    Sydney, Australia
    Full Name:
    Mike
    #3 Mike360, Jan 17, 2005
    Thanks.
    Ive got a magnetic bowl to get around that.

    I will post pics when the mama gets here!
     

Share This Page