It took a long time but finally the result is 100% perfect. It was world wide impossible to get the correct vinyl headlining material for our Dino 206/246 GT`s. So I asked Henk van Lith ( Ferrari interior specialist, www.hvl-autobekleding.nl ) in the Netherlands if he would be able to reproduce the correct stuff. I sent him the original samples and he finally achieved a great result. Henk was able to reproduce the vinyl in the right colour (very light gray) and correct texture. Also he was able to punch the correct holes. 206 GT until approx. L-Serie #00600: 6 x 10 mm pattern approx. L-Serie #00600 until E-serie: 7,5 x 7,5 mm pattern (both pattern are available now) Also possilble to get the vinyl without holes, for 206 GT until L-Serie sun shield and the two roof panels. From M-serie on the roof panels have been covered with black vinyl and the sun shiels with the 7,5 x 7,5 mm pattern headlining vinyl. Also availble now the two different tool leather belts from the luggage compartment. 206 GT until L-serie: long version 75 cm, two holes for fixture with rivets in inner rear left wheel house. M-serie: didn`t have a belt E-serie: short version 65 cm, one hole for fixture with inner bumper screw, left wing. (the belts are 100% perfect copy from original onces, including correct rivets and buckles) If anybody needs the correct original stuff, feel free to contact Henk directly. He is still working on the reproduction of the original 206 GT / L-serie interior carpet and luggage compartment carpet, but it will take some more time ;-) Regards Matthias Image Unavailable, Please Login
Henk van Lith HVL Exclusive Italian Interiors Dreef 60 4014 ML Wadenoijen The Netherlands T: 0031 (0) 344 661610 F: 0031 (0) 344 661616 E: [email protected] I: www.carinteriors.nl
