All, I am placing aftermarket shields on my 355 (very good quality by the way) and I wanted to know if someone with original shields could give me a couple of measurment points... One from the bottom tip of the shield to the fender divider and one from the side of the shield to the fender/door divider. In inches please, thanks... Sonny.....
The consensus from previous posts, experimenting with magnetic shields, and my own shields is 3 inches from widest point to fender/door edge, and 3 inches front top point to edge of fender top/hood edge
Thanks for the info - just purchased shields and will be installing them this weekend. Any other recommendations?
I notice that the US 355s dont have the little side indicators...strange Is that the norm there then Image Unavailable, Please Login
Side markers and white turn signals distinguish Euro from US models (yellow turn signal in front bumper)
