For Sale Original tool kit, circa 1964, near complete

This is the tool kit from an early 330GT 2+2. It may also be appropriate for contemporary Ferraris (250GT, GTE, Lusso). Except as noted below, it has been in its present state since circa 1972.

The following items are known or almost certainly original 1964-era:

• tool roll/bag, one-piece with compartment/pocket for jack
• M. Riganti jack
• full set of Beta No. 55 open-end wrenches, 8mm through 22mm
• large and small wood-handled flat-blade screwdrivers
• T-handle spark plug wrench
• mechanic’s hammer
• universal pliers
• lead hammer for knockoffs, heavily deformed from use
• carburetor jet wrench
• grease gun (but see below)
• grease gun adapter driveshaft extension

The following items are (probably) different from the original kit:

• grease gun flex hose is smooth rubber; I’ve been told the original was probably braided (may be available from Parker Hall)
• replacement lead hammer, original type and style, circa 1972, slightly used
• spare fan belt (this one is likely a later replacement)
• hub bearing puller (this one is a repro from Parker Hall)

The following item is not present:

• oil filter wrench

There is apparent disagreement about whether a kit of this era should include Phillips screwdrivers. I’ve included two (large and small) with the same type of wood handle as the flat-blade screwdrivers, obtained from Lyle Tanner.

There is a small tear in the roll/bag, see photo.

I’ll take offers for the next 24 hours (minimum $7,500 plus shipping).

I will not separate this set, and do not intend to sell to someone who plans to part it out.

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

 

No, sorry.