Personalized Interior Plaque | FerrariChat
Buy

Personalized Interior Plaque

Discussion in 'Ferrari Parts & Collectibles' started by Kevin Rev'n, Jan 8, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 4
  1. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #1 Kevin Rev'n, Jan 8, 2016
    Last edited by a moderator: Sep 7, 2017
    I have wanted one of these for so long i finally decided to get going on that after seeing a car with it in the Gated Modena Thread. I think the buyer could specify what message to display but I am going to bespoke this part of the plaque. The angled base plate that mounts to the console is 100 bucks from Ricambi and I have a spare NOS gated console since mine got a small scratch in it during some service that is sitting on the parts shelf. :)

    Not sure what I will put on the plaque base when I get it mounted but the options are endless. Maybe Kevin Rev'n with a cavalino ;-)
    Image Unavailable, Please Login
     
  2. andy308

    andy308 Formula 3

    Jan 16, 2005
    2,024
    Sarasota, FL
    Full Name:
    Andy
    #2 andy308, Jan 8, 2016
    Was this an option that you could order with a new car?
     
  3. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #3 Kevin Rev'n, Jan 8, 2016
    YES
     
  4. 88Testarossa

    88Testarossa Formula 3

    Sep 25, 2012
    2,450
    Annapolis and Daytona Beach
    Full Name:
    Al
    #4 88Testarossa, Jan 8, 2016
    Very cool!


    Sent by incredibly fast electrons
     
  5. sherpa23

    sherpa23 F1 Veteran
    Owner Rossa Subscribed

    May 28, 2003
    9,994
    Rocky Mountains
    Full Name:
    Bastuna
    #5 sherpa23, Jan 8, 2016
    What's interesting is that the "plate support" is $100 but the plate to go in it is almost $600! Do you think that you have a source to reproduce the plate? It can't be hard, right?
     
  6. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #6 Kevin Rev'n, Jan 8, 2016
    I have skills with aluminum so I could make an insert and then have someone engrave. All these CNC houses are out there I have to think there is an easy solution, although I didn't research it...yet. I can always fill with red paint too and get a high quality decal made! I was thinking maybe get a small lapel pin and set it inside the cavity and pour red paint in to fill and make it special if I have to go the decal route. A fun thing to do on a rainy day.
     
  7. sherpa23

    sherpa23 F1 Veteran
    Owner Rossa Subscribed

    May 28, 2003
    9,994
    Rocky Mountains
    Full Name:
    Bastuna
    #7 sherpa23, Jan 8, 2016
    That is VERY cool!
     
  8. andy308

    andy308 Formula 3

    Jan 16, 2005
    2,024
    Sarasota, FL
    Full Name:
    Andy
    #8 andy308, Jan 8, 2016
    Any local trophy shop can make the insert very easily as well.
     
  9. cf355

    cf355 F1 Rookie

    Feb 28, 2005
    4,208
    Full Name:
    chris
    #9 cf355, Jan 9, 2016
    cool
     
  10. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #10 Kevin Rev'n, Jan 11, 2016
    Looks like Ricambi was optimistic that they could get me one of these. Just got an email that said they cannot source after all. Might be harder to get than I thought. I sent inquiry to Eurospares. We'll see how it goes.
     
  11. sherpa23

    sherpa23 F1 Veteran
    Owner Rossa Subscribed

    May 28, 2003
    9,994
    Rocky Mountains
    Full Name:
    Bastuna
    #11 sherpa23, Jan 11, 2016
    Keep trying. I am sure that one will come up.
     
  12. BladeMD

    BladeMD Formula 3
    Owner Rossa Subscribed

    Oct 20, 2015
    1,140
    Sarasota, FL
    Full Name:
    Hannibal
    #12 BladeMD, Jan 11, 2016
    Last edited by a moderator: Sep 7, 2017
  13. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #13 Kevin Rev'n, Jan 11, 2016
    It would be an easy enough thing to make but I like the paint matching of OEM parts. Wonder what these guys will find?

    Hi Kevin,
    Thank you for contacting us at All Ferrari Parts. Unfortunately, the dedication plate support is not available at this time. We are checking world wide to find out the availability and your price. We will be back to you once we have this information.
    Best regards,
    Tom S.
    All Ferrari Parts
     
  14. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,077
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #14 tazandjan, Jan 11, 2016
    Kevin- Check with Maranello Classic Parts, the old parts house from Maranello Concessionaires before it was broken up.
     
  15. sherpa23

    sherpa23 F1 Veteran
    Owner Rossa Subscribed

    May 28, 2003
    9,994
    Rocky Mountains
    Full Name:
    Bastuna
    #15 sherpa23, Jan 11, 2016
    Honestly, Kevin, make your own dedication plaque and put it there. If you want to take it off later, it would be very easy to do.
     
  16. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #16 Kevin Rev'n, Jan 11, 2016
    Thanks for the tip. They say none but I inquired anyway.

    Yes, this is a solid suggestion. Just the issue of matching the paint. But then polished would look good too since the shifter plate is this way.
     
  17. sherpa23

    sherpa23 F1 Veteran
    Owner Rossa Subscribed

    May 28, 2003
    9,994
    Rocky Mountains
    Full Name:
    Bastuna
    #17 sherpa23, Jan 11, 2016
    Honestly, I would so a simple flat 1"x2.5" or thereabouts plate with a polished border with your own inscription or whatever. I'm sure that you could get it laser etched and then whatever art you wanted. If you find a good source, I would be keen with getting a few done as well. I will pm you my idea.
     
  18. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #18 Kevin Rev'n, Jan 11, 2016
    Last edited by a moderator: Sep 7, 2017
    Do any of you guys have one you can measure? If I go the re-pop route I want it to be close to the original. I could guess the rest but these dimensions are critical. Thanks
    Image Unavailable, Please Login
     
  19. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,077
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #19 tazandjan, Jan 11, 2016
    Last edited by a moderator: Sep 7, 2017
  20. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #20 Kevin Rev'n, Jan 12, 2016
  21. Kevin Rev'n

    Kevin Rev'n Two Time F1 World Champ
    Owner Silver Subscribed

    Nov 29, 2009
    24,399
    Honolulu
    Full Name:
    Kevin
    #21 Kevin Rev'n, Jan 23, 2016
    BUMP...anyone have one they can measure?
     
  22. Bob in Texas

    Bob in Texas F1 Rookie

    Apr 23, 2012
    2,727
    Just East of Weird
    Full Name:
    Bob
    #22 Bob in Texas, Jan 24, 2016
    Rats Kevin. I saw one yesterday at the local FCA meeting. In a Super America. I coulda figured out how to measure. Won't see the car for awhile. If I have a chance I will measure
     
  23. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,500
    Campbell, CA
    Full Name:
    John Zornes
    #23 Skidkid, Jan 24, 2016
    I think there is one in a buddies car. I will look and get some measurements when I see him.
     
  24. rbellezza

    rbellezza F1 Rookie

    Jun 18, 2008
    2,793
    Henderson, NV
    Full Name:
    Roberto Bellezza
    #24 rbellezza, Jan 24, 2016
    Get those ready Kevin, i will buy one !
     
  25. sammyf

    sammyf Formula Junior

    Aug 13, 2004
    260
    Northern California
    #25 sammyf, Jan 24, 2016
    Just bought a spare console off Craig's and it showed up with this:
    Image Unavailable, Please Login

    A=80mm
    B=23.82mm
    C=2.3mm
    D=10.3mm


    Sent from my iPhone using Tapatalk
     
Page 1 of 4

Share This Page