Pictures of 348's with aftermarket wheels please | Page 2 | FerrariChat

Pictures of 348's with aftermarket wheels please

Discussion in '348/355' started by Scaledetails, Aug 17, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. NYJETSFAN

    NYJETSFAN Formula 3

    May 11, 2001
    1,096
    Kalifornia
    Full Name:
    Jr
    #26 NYJETSFAN, Aug 18, 2005
    the wheels only came in 18 x 8 . thats fine for the front, but the rear needs more, I found a company here in Stockton that widen them by another 2 inches, then found some short studds for the rim to bolt up! if I remember right the bolt patterns are 108 x 5 I think, not many wheel companies make that size... I think when I was done I had around $3000 in the complete project. rims and tire
     
  2. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Oct 31, 2003
    7,789
    CA
    Full Name:
    Jerry
    #27 Chiaro_Slag, Aug 18, 2005
    Sweeeeet!
     
  3. Chiaro_Slag

    Chiaro_Slag F1 Veteran

    Oct 31, 2003
    7,789
    CA
    Full Name:
    Jerry
    #28 Chiaro_Slag, Aug 18, 2005
    Speedlines are great - Nice!
     
  4. Tifosi66

    Tifosi66 Formula 3

    Nov 30, 2004
    1,786
    Jiang Jia Jie
    Full Name:
    Li-Ge
    #29 Tifosi66, Aug 19, 2005
    If I'm not mistaken, the 348GTC runs on 18" similar to Chiaro Slag's wheels and the Japan only Special Edition 512TR.
     
Page 2 of 2

Share This Page