Pittsburgh (Harbor Freight) radiator pressure tester for a 355 | FerrariChat

Pittsburgh (Harbor Freight) radiator pressure tester for a 355

Discussion in 'Technical Q&A' started by Enzojr, Feb 11, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Enzojr

    Enzojr F1 World Champ

    Dec 12, 2013
    14,001
    West of PDX
    Full Name:
    Tomy
    #1 Enzojr, Feb 11, 2018
    Image Unavailable, Please Login

    anybody use one of these before.
    Of course out of all the adapters there is not one specified for a 355 ;)
    Curious if anyone has used one, or if by chance figure out which one fine a 355 coolant tank ?
     
  2. Ferrari Tech

    Ferrari Tech Formula 3

    Mar 5, 2010
    1,125
    Georgia
    Full Name:
    Wade Williams
    #2 Ferrari Tech, Feb 12, 2018
    I have a tester made by Stant. The adapter for Ferrari (355) is from AST and is # FZ25. I purchased the adapter through my local Matco Tool dealer.
     
  3. Enzojr

    Enzojr F1 World Champ

    Dec 12, 2013
    14,001
    West of PDX
    Full Name:
    Tomy
    #3 Enzojr, Feb 12, 2018
    Thanks ;)
     
  4. Challenge

    Challenge Formula 3

    Sep 27, 2002
    1,938
    PA
    Full Name:
    Kevin
    #4 Challenge, Feb 17, 2018
    Or buy the 8mile (I think that was it....blue case) brand kit from Amazon. The Army green adapter fit my 355 perfectly.
     
    Qavion likes this.
  5. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    5,965
    Indio Ca/ Alberta
    Full Name:
    Grant
    #5 taz355, Feb 18, 2018
    Kevin which kit did you buy it does not seem obvious on amazon. Thanks
     
  6. Challenge

    Challenge Formula 3

    Sep 27, 2002
    1,938
    PA
    Full Name:
    Kevin
    #6 Challenge, Feb 18, 2018
  7. SethP

    SethP Karting

    Jul 2, 2014
    83
    Corning, NY
    Full Name:
    Seth Parks
    #7 SethP, Feb 18, 2018
    I have the one from Harbor Freight. I’ve used it on my Diablo but not the 355. Its quite universal so I don’t see why it wouldn’t work.
     
  8. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    5,965
    Indio Ca/ Alberta
    Full Name:
    Grant
    #8 taz355, Feb 20, 2018
    Can you check to see if one of the fittings actually works.


    Thanks kevin appreciate it.
     
  9. netman

    netman Formula 3

    Jun 17, 2008
    1,905
    OC SoCal
    #9 netman, Feb 21, 2018
    You can go to your local auto zone and get a free loaner.
     

Share This Page