PIX | FerrariChat
Buy

PIX

Discussion in '308/328' started by Gliozzi, Jun 21, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Gliozzi

    Gliozzi Karting

    May 6, 2011
    84
    Oakdale Calif.
    Full Name:
    Bob
    #1 Gliozzi, Jun 21, 2011
    Last edited by a moderator: Sep 7, 2017
  2. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    #2 maurice70, Jun 21, 2011
    Of?
     
  3. viphoto

    viphoto Formula Junior

    Sep 11, 2010
    264
    Carlsbad, CA
    Full Name:
    Mark
    #3 viphoto, Jun 21, 2011
    Looks like the spring washer behind the outer cam Drive Bearing...Do I win?
     
  4. lostbowl

    lostbowl Formula 3

    Apr 30, 2009
    1,246
    Michigan
    Full Name:
    Tom
    #4 lostbowl, Jun 21, 2011
    Now I have to check the parts manual because I don't remember having a distance or spring washer on mine. ???????????? Lost
     
  5. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,614
    Birmingham, AL
    Full Name:
    Tommy
    #5 Dr Tommy Cosgrove, Jun 21, 2011
    cock ring?
     
  6. flyngti

    flyngti Formula 3

    Jul 16, 2009
    1,257
    Snohomish, WA
    Full Name:
    Eric L
    #6 flyngti, Jun 21, 2011
    Ouch. Thin and sharp.
     
  7. ramosel

    ramosel Formula 3

    Sep 11, 2004
    1,237
    Meadow Vista, CA
    Full Name:
    R Moseley
    #7 ramosel, Jun 21, 2011
    Last edited by a moderator: Sep 7, 2017
  8. Ferraripilot

    Ferraripilot F1 World Champ
    Owner Project Master

    May 10, 2006
    17,936
    Atlanta
    Full Name:
    John!
    #8 Ferraripilot, Jun 21, 2011
    +1
     
  9. Gliozzi

    Gliozzi Karting

    May 6, 2011
    84
    Oakdale Calif.
    Full Name:
    Bob
    #9 Gliozzi, Jun 21, 2011
    Yes You DO
     
  10. lostbowl

    lostbowl Formula 3

    Apr 30, 2009
    1,246
    Michigan
    Full Name:
    Tom
    #10 lostbowl, Jun 22, 2011
    Looked in the parts book and I see a washer used on the cars with an exterior seal but I don't see anything for the engine with the seal inside. Mine is an 82 and I just changed the bearings and seals and there were no spring washers in either side and it doesn't appear as though anything was touched by bthe PO except the valve settinga and that's a whole other chapter. Lost
     
  11. viphoto

    viphoto Formula Junior

    Sep 11, 2010
    264
    Carlsbad, CA
    Full Name:
    Mark
    #11 viphoto, Jun 22, 2011
    FWIW My 79 has the internal seal and behind the outer sealed bearing was one of these washers. Not sure what it would really do except distance the bearing from the circlip....
     
  12. lostbowl

    lostbowl Formula 3

    Apr 30, 2009
    1,246
    Michigan
    Full Name:
    Tom
    #12 lostbowl, Jun 22, 2011
    I would have to guess that the spring washer took up tolerance that Luigi couldn't obtain without CNC. I'm not concerned other than why the parts manaual doesn't show them. Then again I do come across variations in these posts. Lost
     
  13. Jedi

    Jedi Moderator
    Moderator Lifetime Rossa Owner

    Mar 18, 2008
    32,352
    Seattle Area
    Full Name:
    Dave
    #13 Jedi, Jun 22, 2011
    O
     

Share This Page