Please help! | FerrariChat

Please help!

Discussion in 'Technical Q&A' started by Nickt, Sep 6, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Nickt

    Nickt Formula 3

    Joined:
    Feb 24, 2006
    Messages:
    1,741
    Location:
    Iver, Buckinghamshir
    Full Name:
    Nick T
    I started this thread in the 308 section but was advised to post it here..
    i have started getting this knocking noise coming from the front of the car, at one or two miles per hour there is a knocking coming from the front. Above that speed it is difficult to tell because of other car noises.
    I can feel the “knock” through the floor pan, pedals and steering column.

    I took the wheels off and there is nothing loose, shocks were changed last year…

    I got my old man to bounce on the front suspension and there is no noise, but at such a low speed the shocks would not be doing anything anyway.

    There is no noise when I turn the wheel…. Help! It sounds quite dangerous!


    http://www.ferrarichat.com/forum/showthread.php?p=136054995&posted=1#post136054995


    Regards
    Nick
     
  2. Nickt

    Nickt Formula 3

    Joined:
    Feb 24, 2006
    Messages:
    1,741
    Location:
    Iver, Buckinghamshir
    Full Name:
    Nick T
    Last edited by a moderator: Sep 7, 2017
  3. smg2

    smg2 F1 World Champ Sponsor

    Joined:
    Apr 1, 2004
    Messages:
    16,440
    Location:
    Dumpster Fire #31
    Full Name:
    SMG
    okay i'll stab at it. from your description it sounds like the noise is a result of something moving in rotation. that can narrow down the areas to look. does turning the steering wheel at those low speeds have any effect on the sound? are all the bolts and shims in place on the suspension arms? if you've replaced the suspension recently check to make sure all the bolts and nuts affected are still tight.

    the more serious problem could be the hub bearing, or a cracked hub. check the front hubs ASAP! i'll see if i can dig up a diagram.
     

Share This Page