PLUG WIRES | FerrariChat
Buy

PLUG WIRES

Discussion in '308/328' started by 4right, Mar 21, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 4right

    4right F1 Rookie
    Rossa Subscribed

    Sep 14, 2008
    2,966
    US/Japan/Singapore/Canada/US
    #1 4right, Mar 21, 2010
    Question, Just purchased a new set of plug wires from Rutlands that are prenumbered 1-4 for both banks. On the rear bank the number 4 wire is the longest wire or for cylinder number 1 and on the front the numbers are in reverse as the longest wire is designated with a 1.

    Before I get started, do these numbers indicate the proper distributor placement?

    Thanks
     
  2. 4right

    4right F1 Rookie
    Rossa Subscribed

    Sep 14, 2008
    2,966
    US/Japan/Singapore/Canada/US
    #2 4right, Mar 21, 2010
    Nothing like consulting the OM, I found what I was looking for.
     
  3. M.James

    M.James F1 Rookie

    Jun 6, 2003
    2,721
    Worcester, MA
    Full Name:
    Michael.C.James
    #3 M.James, Mar 22, 2010
    You could have cut your costs in half, had you just had your existing wires 'rebuilt' with new cores....the Cavis cap-ends and outer wire tubing can be cleaned and re-used.
     
  4. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    57,982
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #4 mwr4440, Mar 22, 2010
    Next time, talk to DaveHelms.

    M_A_N_Y times better wire (than OEM) at MUCH less $$$$$. MUCH Less $.


    You should be contacting him in about 5-10 years tops.
     
  5. barcheta

    barcheta F1 Rookie

    Nov 15, 2003
    3,738
    Maryland
    Full Name:
    Jim
    #5 barcheta, Mar 22, 2010
    short answer is yes.... search is your friend on here. With a search you also would have discovered that OEM is not always the best solution. Not to mention the cost.... Taylor wires work very well. As suggested, you couldn't go wrong contacting Dave Helms. I'd even consider ebaying those wires to get a more cost effective (and better) solution from Dave.
     

Share This Page