Plymouth Prowlers

I’m going to figure something out for sure I’m saying mechanically she’s done. I’m going to try and make something like an old charger hood. We just bought another house and I have to get on moving things and making my wife happy lol much bigger garage in the new place. Putting in a lift etc making a shop. Once I’m settled I’ll get the hood figured out quick. Too much going on to concentrate on that.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Hung out with dad today. This is more your guys speed
Image Unavailable, Please Login

 

Saved this pic in 2020 when I bought the car. Not bad........
Image Unavailable, Please Login Image Unavailable, Please Login

 

In her new spot!! Ran mint to the new place, lots of spots to cruise out here!! Garage is 1/2 way there. Split unit A/C and 2 post service lift very soon. Hood is there as well, that's next.

 

Little more done. Lift in a few weeks.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Decided to display the collection.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

https://youtube.com/shorts/RaqBmQAdEx0?si=_hQM4XcxrDCQKXRd

https://youtube.com/shorts/AEdvK2Y2hpM?si=TtYG9yjSYRwqfsaA

I hope everyone is doing well. She's all dialed in. Gonna start working on the hood soon.

 

Time for an oil change! I fabbed up a few more goodies too. She'll be up for a bit.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Dad stopped by today with my 2 uncles. He blew the dust off the 765LT and the DBS Superlegerra. I don't think my hoods goin back on. I dig it with no top and the hood off.
View attachment 3820367 Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Designed and fabbed up a lower suspension support that bolts between the two lower control arms up front. 1.25 dia. .25 thick chromoly tube with 3/4 rod ends. The 3/4 rod ends have a .75 bore hole. I had to get a .50 ID and .75 OD aluminum tubing and cut .75 sleeves that i could machine to .551 as clearance for the factory 14mm bolt in the control arms. The .75 OD makes it line to line so they had a nice snug press fit that i used the bolt, washers and my impact gun as a press. The bolts showing were for layout and fabrication only. 14mm bore rod ends don't exist with a 3/4 thread so this was necessary for proper fitment. I have to put her back up and see exactly what new hardware length I am going to use. Maybe tomorrow I'll get her back up.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Goes on the inside but i laid it up to measure for the hardware. Yep, that'll do ;-)
Image Unavailable, Please Login

 

Have the hardware Friday. Car show with dad at his clubhouse where he lives in The Quarry if anyone's there I'll see ya there. I'm bringin my car and we're bringin 4 of his.
Image Unavailable, Please Login Image Unavailable, Please Login

 

Very happy with the fit. Car feels super tight, not so planted, heated the tires up around the cul-de-sac but we'll see when I get her out on the road tomorrow.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Had a lot of fun today. Pretty nice lineup. 765LT Won peoples choice.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I had to share this because I am in complete shock!!! Every time my car goes out I get this black soot all over the trunk (from burnouts) and black spots all over the inner fender well (rubber) and right under the headlight's (no front fenders). I got this stuff on amazon and it took it all off with ease and the wax is still on the paint!! Feels smooth. I have to polish my wheels and really give her a good clean because I want to cruise Sunday. If any of you guys have stains on the paint from tar or oil, get this!!! I hope everyone had a great Easter and is doing well.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Couldn't sleep last night. Up at 3 am polishing her up, paint looks drippy wet. Took a blast to get coffee this morning, she is running MINT!!
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

You should post a video of you getting the car up on the four blocks.

 

Next time I put her up, you got it.

 

Hope everyone's doing well. I just posted a quick turnaround video. Cars running great.
Face next time she goes up I will make a vid, I didn't forget you brother!!
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login