Polishing 430 carbon fibre seat backs | FerrariChat
Buy

Polishing 430 carbon fibre seat backs

Discussion in '360/430' started by ur84wr, Dec 4, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ur84wr

    ur84wr Karting

    Jan 6, 2015
    101
    Australia
    Full Name:
    Max
    #1 ur84wr, Dec 4, 2018
    has anyone tried to do this? The clearcoat on mine is quite dull and not sure if can be polished? Can anyone confirm if it’s possible?
     
  2. shifter

    shifter Formula Junior

    Apr 8, 2004
    625
    Danville, Ca
    Full Name:
    Joe
    #2 shifter, Dec 4, 2018
    I polished my CF trim pieces (door sills and tunnel tray) and the engine CF pieces. They came out awesome. I used a DA with an orange chemical guys pad, Wolfgang Uber compound, then Wolfgang total swirl remover, Wolfgang finishing glaze, and finally a deep gloss sealant.

    If they are yellowed, it may take some sanding. I had to send a few parts to MACarbon for refinishing from the engine bay.


    Sent from my iPhone using FerrariChat
     
  3. 338Lapua

    338Lapua Formula Junior

    Sep 5, 2015
    835
    Michigan
    Full Name:
    Tony
    #3 338Lapua, Dec 4, 2018
    I did the same thing. I used a DA with Sonax Perfect finish and the appropriate pad then finished with Miyabi coat. I also found it easier to take my seats out.
     
  4. APA#1

    APA#1 Formula 3

    Nov 5, 2003
    1,311
    Central Florida
    #4 APA#1, Dec 4, 2018
    Just polish/wax it like you would the paint
     
    f355spider likes this.
  5. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,782
    #5 mwstewart, Dec 4, 2018
    As above: regular polish, or machine polish it if scratched.
     

Share This Page