Porto Question: How do I change the time? | FerrariChat

Porto Question: How do I change the time?

Discussion in 'California/Portofino/Roma' started by JJ97, Apr 5, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JJ97

    JJ97 Karting

    Apr 1, 2012
    70
    Chicago
    Full Name:
    Joe Nocera
    Daylight savings time has caught up to me and I realized I can't figure out where I change the time. Doesn't look like its on the main touch screen or on the joystick to the left of the wheel.

    Am I missing something?

    Thanks
     
  2. KarlA69

    KarlA69 Formula Junior

    Oct 9, 2017
    759
    UK
    Full Name:
    Karl
    I asked the same thing! Reply below (I haven't had time to try it yet)

    The clock and date settings are set in the right hand screen in the instrument cluster.

    You have to be stationary to change the settings and for the full menus to appear.

    Below the right hand screen is a cluster of dials and buttons. Press the back button (has arrow on it) to get to the main screen menu. Turn the large button to the left and select 'Settings" and push the button in to select.

    To change the time and date turn the large button to scroll down to Date-Hour and push the button to select.

    To change the speed limit turn the large button to scroll down to Car Settings and push to select. Then scroll to Speed Limit and push the button to select.
     
  3. JJ97

    JJ97 Karting

    Apr 1, 2012
    70
    Chicago
    Full Name:
    Joe Nocera
    Thanks Karl - is that for a RHD car? I don't think I have a dial below the right hand screen. Only have a dial for the left hand screen, wondering if it is flipped in the US. Need to check after work.
     
  4. JJ97

    JJ97 Karting

    Apr 1, 2012
    70
    Chicago
    Full Name:
    Joe Nocera
    Thanks again Karl - to close the loop. If you are in a US car (LHD) the dial in question is on the left side of the steering wheel and not the right as the directions above say.

    Also the key point I missed as pressing the back button before using the dial. Lots of config settings once you press the back button.
     

Share This Page