powder coating in Austin, TX

Discussion in 'Texas' started by bizz, Oct 20, 2009.

  1. bizz

    bizz Formula Junior

    May 26, 2008
    Redwood City, CA
    Full Name:
    joe B
    Anybody have any good powder coating contacts in Austin? Need to get a set of wheels blasted and coated.

    I walked into a place this morning where- I'm not kidding- they were cooking wheels in a normal Maytag kitchen oven. YIKES.
  2. To remove this ad click here.

  3. Osiris_x11

    Osiris_x11 Formula Junior

    Oct 30, 2007
    Austin, Texas
    #2 Osiris_x11, Oct 20, 2009
    Last edited: Oct 20, 2009
    A friend of mine is quite close & good w/ the owner of Sideways Auto Salon (Dave). I've seen their work & it's quite good. I recall they do all sorts of surface-treatments & powder-coating/etc'. Perhaps give 'em a call & check 'em out.

    Otherwise, there's a local/regional wheel-repair service that charges $125'ish/wheel (which includes repair/restoration/refinishing), details posted here.
  4. jasperw4

    jasperw4 Rookie

    Aug 14, 2009
    #3 jasperw4, Oct 20, 2009
    Last edited: Oct 20, 2009
  5. Conquest351

    Conquest351 Karting

    Mar 13, 2008
    Central Texas
    Full Name:
    Brian Hamilton
    When I used to work for Motion Dynamics there in Austin, we used Akin Powdercoating in Cedar Park for pieces that wouldn't fit in our oven. He even did an old 4.6L Ford engine block for me that I was going to make a coffee table from. Never finished that project. Anyway, he's right off 1431 on the WalMart side of the 183/1431 intersection before you get to Baghdad Rd. Here's the contact info...

    Akin & Company
    1003 Cherry Lane
    Cedar Park, TX 78613
    Phone: (512) 331-5787
    Fax: (512) 331-5787

Share This Page