Power Steering Repair Question | FerrariChat
Buy

Power Steering Repair Question

Discussion in '348/355' started by KMR968Turbo, Dec 11, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. KMR968Turbo

    KMR968Turbo Formula 3

    Nov 11, 2007
    1,001
    Calgary, Alberta
    Full Name:
    Erik
    #1 KMR968Turbo, Dec 11, 2013
    Is it possible to change the pressure line to the power steering rack without removing the rack? My line is leaking and needs replacement but I don't know how to undo the banjo bolt without removing the rack.
     
  2. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    #2 2NA, Dec 11, 2013
    Chevy? Ford? Minivan? ;)

    Complete your profile.
     
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,674
    San Carlos, CA
    Full Name:
    Mitchell Le
    #3 yelcab, Dec 11, 2013
    The 355 banjo bolt to the steering rack is accessed from inside the car, after sliding the steering column up and away, and after removing the square rubber bellow covering the end of the rack.

    Not a pleasant job.
     
  4. roadracer311

    roadracer311 Formula 3

    May 6, 2009
    2,398
    San Francisco
    Full Name:
    Paul
    #4 roadracer311, Dec 13, 2013
    Last edited by a moderator: Sep 7, 2017
    Mitchell is right about reaching the banjo bolts. Here are the other ends of the hoses. Power steering hoses are the two left-most rubber hoses.
    Image Unavailable, Please Login
     

Share This Page