Proper torque oil pan fasteners? | FerrariChat
Buy

Proper torque oil pan fasteners?

Discussion in '308/328' started by Big Daddy, Oct 5, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Big Daddy

    Big Daddy Karting

    Jan 3, 2009
    212
    Albuquerque, NM, USA
    Full Name:
    RJ
    #1 Big Daddy, Oct 5, 2009
    I am replacing the oil pan gaskets today. I have read the threads with the procedures, but I can't find the proper torque setting in ft/lb or in/lb.

    Anyone know? Thanks.
     
  2. Steve King

    Steve King F1 Rookie

    Feb 15, 2001
    4,367
    NY
    #2 Steve King, Oct 5, 2009
    I used SS nylok nuts at 10 ft/lbs and worked from the center out using a cris-cross pattern.
     
  3. mustardfj40

    mustardfj40 Formula 3

    Jun 17, 2004
    1,142
    Northen California
    Full Name:
    Ken
    #3 mustardfj40, Oct 5, 2009
    I believe the factory spec is 6.5 ft/lbs or 78 in/lbs (I used in/lbs on my torque wrench). I used hylomar thinnly on the gasket. And retorque all the nuts after a few day. No leaky :)
     

Share This Page