I need to pump them to get a firm pedal. Anything special bout bleeding the brakes on a 2004 360?
Remove large panel in trunk compartment u may have to get to front bleed screw from there and then panel covering brake reservoir there's 2 bleed nipples on top of master cylinder PITA to get to start there. Then bleed from rear corner furthest from mast cylinder. If ur car is L/H/Driver u will start from pass rear then driver rear then pass front then driver front. Good luck
A motive Power Bleeder makes flushing the fluid a one man job and very easy. First time I flushed my 360 brake fluid many years ago, I did not know the bleeder on the master cylinder was there and still had a mushy pedal. Bled the master cylinder as mentioned by rizzo308 and it firmed right up.
Yup, I use Motive and run a bleed sequence on the computer. Stupid me. What is bleed sequence on computer? Does that involve activating the ABS?
When you run the program ....It vibrates for each corner. Image Unavailable, Please Login Image Unavailable, Please Login