Question about replacing the exhaust on first gen CA | FerrariChat
Buy

Question about replacing the exhaust on first gen CA

Discussion in 'California(Portofino)/Roma(Amalfi)' started by John Geiger, Jul 24, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. John Geiger

    John Geiger Karting

    Aug 8, 2019
    50
    Raleigh, NC
    Full Name:
    John Geiger
    #1 John Geiger, Jul 24, 2020
    I've purchased a Tubi exhaust for my first generation CA and I'm wondering if you need to remove the rear bumper to do the install or do you have enough access when removing the rear wheels. Anyone know? Thanks in advance!
     
  2. Alleykat

    Alleykat Karting

    Apr 2, 2009
    165
    Houston,Tx
    Full Name:
    Alex
    #2 Alleykat, Jul 30, 2020
    I just did a mid resonator delete on a friends car recently. It was a total PITA to get the stock center piping out and back in. Expect some rusty bolts/nuts. We had to remove the under panels and loosen up pretty much all the way back to the mufflers. From what I could see you might be able to get away with not removing rear bumper.
     
    John Geiger likes this.
  3. John Geiger

    John Geiger Karting

    Aug 8, 2019
    50
    Raleigh, NC
    Full Name:
    John Geiger
    #3 John Geiger, Jul 30, 2020
    Thanks...yes from what I've been able to gather I won't need to take the bumper off...and one person told me you don't even need to take the wheels off but I find that hard to believe but we will see. :)
     

Share This Page