Question on reassembly of trans linkage: | FerrariChat
Buy

Question on reassembly of trans linkage:

Discussion in 'Technical Q&A' started by christopher, Feb 27, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. christopher

    christopher Formula 3

    Nov 29, 2003
    1,136
    Ontario California
    Full Name:
    Christopher
    #1 christopher, Feb 27, 2006
    Hello fellow "F"-Chatters,

    It's now time to reassemble the trans link age on the o'l 79 308!

    I was wondering if anyone would offer a little tutelage as I attempt to align the linkage with the gear selector inside the transmission, or the sliding post that the seals ride on with the selector inside the transmission.

    Any pictures would be a great help. How should it look when I'm done?

    Thank you,

    Chris,
     
  2. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #2 Verell, Feb 28, 2006
    This thread should help, has some nice pics:
    328 Shifting Difficulty
    http://ferrarichat.com/forum/showthread.php?t=24678

    Plan on having a 2nd person to help you, or at least get Kermit's shift alignment tool:
    www.durable1.com

    To align the shift linkage, you really need to have the detent balls & springs in place. This means making a plate up that mimics that end of the sump cover. It could even be made from a 1/2" thick block of a hard wood like oak or maple & longer bolts used.
     

Share This Page