Question regarding shift alignment | FerrariChat
Buy

Question regarding shift alignment

Discussion in 'Technical Q&A' started by christopher, May 30, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. christopher

    christopher Formula 3

    Nov 29, 2003
    1,136
    Ontario California
    Full Name:
    Christopher
    #1 christopher, May 30, 2006
    Hello Gentlemen,

    I'm attempting to align me shifting fork (inside the trans) to the correct position. Can anyone tell/show me how the fork (inside the trans) should look when the shifter is in neutral?
     
  2. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #2 Verell, May 30, 2006
    The actuators for all 3 gears should be lined up, with the lever operated by the shift rod centered in the middle actuator.

    Have you made up something that keeps the detent balls & springs in place while you're doing this? If not, make one out of a piece of hard wood.
     

Share This Page